M30624FGPGPU5C Datasheet, PDF (48/103 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/62P Group (M16C/62P, M16C/62PT)
5. Electrical Characteristics
Table 5.9 Low Voltage Detection Circuit Electrical Characteristics
Symbol
Vdet4
Vdet3
Vdet4-Vdet3
Vdet3s
Vdet3r
Parameter
Low Voltage Detection Voltage ⁽¹⁾
Reset Level Detection Voltage ^{(1, 2)}
Electric potential difference of Low Voltage
Detection and Reset Level Detection
Low Voltage Reset Retention Voltage
Low Voltage Reset Release Voltage ⁽³⁾
Standard
Measuring Condition
Unit
Min.
Typ.
Max.
VCC1=0.8V to 5.5V
3.3
3.8
4.4
V
2.2
2.8
3.6
V
0.3
V
0.8
V
2.2
2.9
4.0
V
NOTES:
1. Vdet4 > Vdet3.
2. Where reset level detection voltage is less than 2.7 V, if the supply power voltage is greater than the reset level detection
voltage, the microcomputer operates with f(BCLK) ≤ 10MHz.
3. Vdet3r > Vdet3 is not guaranteed.
4. The voltage detection circuit is designed to use when VCC1 is set to 5V.
Table 5.10 Power Supply Circuit Timing Characteristics
Symbol
Parameter
Standard
Measuring Condition
Unit
Min.
Typ.
Max.
td(P-R)
Time for Internal Power Supply Stabilization
During Powering-On
VCC1=2.7V to 5.5V
2
ms
td(R-S)
STOP Release Time
150
µs
td(W-S)
Low Power Dissipation Mode Wait Mode
Release Time
150
µs
td(S-R)
Brown-out Detection Reset (Hardware Reset 2) VCC1=Vdet3r to 5.5V
Release Wait Time
6 ⁽¹⁾
20
ms
td(E-A)
Low Voltage Detection Circuit Operation Start VCC1=2.7V to 5.5V
Time
20
µs
NOTES:
1. When VCC1 = 5V.
Rev.2.41 Jan 10, 2006 Page 46 of 96
REJ03B0001-0241