R5F2L357CNFP_11 Datasheet, PDF (46/75 Pages) Renesas Technology Corp – These groups have data flash (1 KB × 4 blocks) with the background operation (BGO)

R8C/L35C Group, R8C/L36C Group, R8C/L38C Group, R8C/L3AC Group
5. Electrical Characteristics
5.2 Recommended Operating Conditions
Table 5.2
Recommended Operating Conditions
(VCC = 1.8 to 5.5 V and Topr = −20 to 85°C (N version) / −40 to 85°C (D version), unless
otherwise specified.)
Symbol
Parameter
VCC/AVCC Supply voltage
VSS/AVSS Supply voltage
VIH
Input “H” voltage Other than CMOS input
CMOS
input
Input level
switching
function
(I/O port)
Input level selection
: 0.35 VCC
Input level selection
: 0.5 VCC
Input level selection
: 0.7 VCC
VIL
Input “L” voltage Other than CMOS input
CMOS
input
Input level
switching
function
(I/O port)
Input level selection
: 0.35 VCC
Input level selection
: 0.5 VCC
Input level selection
: 0.7 VCC
IOH(sum)
IOH(sum)
IOH(peak)
IOH(avg)
IOL(sum)
IOL(sum)
IOL(peak)
IOL(avg)
f(XIN)
Peak sum output Sum of all pins IOH(peak)
“H” current
Average sum
Sum of all pins IOH(avg)
output “H” current
Peak output “H” Port P10, P11 ⁽²⁾
current
Other pins
Average output Port P10, P11 ⁽²⁾
“H” current ⁽¹⁾ Other pins
Peak sum output Sum of all pins IOL(peak)
“L” current
Average sum
Sum of all pins IOL(avg)
output “L” current
Peak output “L” Port P10, P11 ⁽²⁾
current
Other pins
Average output Port P10, P11 ⁽²⁾
“L” current ⁽¹⁾ Other pins
XIN clock input oscillation frequency
f(XCIN) XCIN clock input oscillation frequency
fOCO40M When used as the count source for timer RC, timer RD, or
timer RG ⁽³⁾
fOCO-F fOCO-F frequency
—
System clock frequency
f(BCLK) CPU clock frequency
Conditions
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
4.0 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC < 4.0 V
1.8 V ≤ VCC < 2.7 V
2.7 V ≤ VCC ≤ 5.5 V
1.8 V ≤ VCC < 2.7 V
1.8 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC ≤ 5.5 V
2.7 V ≤ VCC ≤ 5.5 V
1.8 V ≤ VCC < 2.7 V
2.7 V ≤ VCC ≤ 5.5 V
1.8 V ≤ VCC < 2.7 V
2.7 V ≤ VCC ≤ 5.5 V
1.8 V ≤ VCC < 2.7 V
Standard
Unit
Min. Typ. Max.
1.8
—
5.5
V
—
0
—
V
0.8 VCC —
VCC
V
0.8 VCC —
VCC
V
0.9 VCC —
VCC
V
0.5 VCC —
VCC
V
0.55 VCC —
VCC
V
0.65 VCC —
VCC
V
0.65 VCC —
VCC
V
0.7 VCC —
VCC
V
0.8 VCC —
VCC
V
0.85 VCC —
VCC
V
0.85 VCC —
VCC
V
0.85 VCC —
VCC
V
0
— 0.2 VCC V
0
— 0.2 VCC V
0
— 0.05 VCC V
0
— 0.2 VCC V
0
— 0.2 VCC V
0
— 0.2 VCC V
0
— 0.4 VCC V
0
— 0.3 VCC V
0
— 0.2 VCC V
0
— 0.55 VCC V
0
— 0.45 VCC V
0
— 0.35 VCC V
—
—
−160 mA
—
—
−80 mA
—
—
−40 mA
—
—
−10 mA
—
—
−20 mA
—
—
−5 mA
—
—
160 mA
—
—
80 mA
—
—
40 mA
—
—
10 mA
—
—
20 mA
—
—
5
mA
—
—
20 MHz
—
—
5 MHz
— 32.768 50 kHz
32
—
40 MHz
—
—
20 MHz
—
—
5 MHz
—
—
20 MHz
—
—
5 MHz
—
—
20 MHz
—
—
5 MHz
Notes:
1.
2.
3.
The average output current indicates the average value of current measured during 100 ms.
This applies when the drive capacity of the output transistor is set to High by registers P10DRR and P11DRR. When the drive
capacity is set to Low, the value of any other pin applies.
fOCO40M can be used as the count source for timer RC, timer RD, or timer RG in the range of VCC = 2.7 V to 5.5V.
R01DS0095EJ0101 Rev.1.01
Apr 15, 2011
Page 46 of 72