R8C33G Datasheet, PDF (44/54 Pages) Renesas Technology Corp – RENESAS MCU

Under development ^{Preliminary document}
Specifications in this document are tentative and subject to change.
R8C/33G Group, R8C/33H Group
5. Electrical Characteristics
Table 5.17 Electrical Characteristics (2) [3.3 V ≤ Vcc ≤ 5.5 V]
(Topr = −40 to 85°C (J version) / −40 to 125°C (K version), unless otherwise specified.)
Symbol
Parameter
Condition
ICC
Power supply
High-speed
XIN = 20 MHz (square wave)
current
clock mode
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
(VCC = 3.3 to 5.5 V)
No division
Single-chip mode,
output pins are
open, other pins
XIN = 16 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
No division
are VSS
XIN = 10 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
No division
XIN = 20 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
XIN = 16 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
XIN = 10 MHz (square wave)
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
High-speed
on-chip
oscillator mode
XIN clock off
High-speed on-chip oscillator on fOCO-F = 20 MHz
Low-speed on-chip oscillator on = 125 kHz
No division
XIN clock off
High-speed on-chip oscillator on fOCO-F = 20 MHz
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8
Low-speed
on-chip
oscillator mode
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
Divide-by-8, FMR27 = 1, VCA20 = 0
Wait mode
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
While a WAIT instruction is executed
Peripheral clock operation
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
XIN clock off
High-speed on-chip oscillator off
Low-speed on-chip oscillator on = 125 kHz
While a WAIT instruction is executed
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
VCA20 = 1
Stop mode
XIN clock off, Topr = 25°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
XIN clock off, Topr = 85°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
XIN clock off, Topr = 125°C
High-speed on-chip oscillator off
Low-speed on-chip oscillator off
CM10 = 1
Peripheral clock off
VCA27 = VCA26 = VCA25 = 0
Standard
Min. Typ. Max.
Unit
− TBD TBD mA
− TBD TBD mA
− TBD −
mA
− TBD −
mA
− TBD −
mA
− TBD −
mA
− TBD TBD mA
− TBD −
mA
− TBD TBD µA
− TBD TBD µA
− TBD TBD µA
− TBD TBD µA
− TBD −
µA
− TBD −
µA
REJ03B0306-0010 Rev.0.10
Jul. 21, 2010
Page 44 of 51