UPG2214TB-A Datasheet, PDF (4/14 Pages) Renesas Technology Corp – GaAs Integrated Circuit for L, S-Band SPDT Switch

μPG2214TB
A Business Partner of Renesas Electronics Corporation.
ELECTRICAL CHARACTERISTICS
(TA = +25°C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC cut capacitors = 100 pF, unless otherwise specified)
Parameter
Insertion Loss 6
Insertion Loss 7
Insertion Loss 8
Insertion Loss 9
Insertion Loss 10
Isolation 6
Isolation 7
Isolation 8
Isolation 9
Input Return Loss 3
Output Return Loss 3
0.1 dB Loss Compression
Input Power ^{Note 2}
1 dB Loss Compression
Input Power ^{Note 3}
Switch Control Current
Switch Control Speed
Symbol
Test Conditions
Lins6
f = 0.05 to 0.5 GHz ^{Note 1}
Lins7 f = 0.5 to 1.0 GHz
Lins8 f = 1.0 to 2.0 GHz
Lins9 f = 2.0 to 2.5 GHz
Lins10
ISL6
f = 2.5 to 3.0 GHz
f = 0.05 to 0.5 GHz ^{Note 1}
ISL7 f = 0.5 to 2.0 GHz
ISL8 f = 2.0 to 2.5 GHz
ISL9
RLin3
RLout3
f = 2.5 to 3.0 GHz
f = 0.05 to 3.0 GHz ^{Note 1}
f = 0.05 to 3.0 GHz ^{Note 1}
Pin (0.1 dB) f = 2.0/2.5 GHz
f = 0.5 to 3.0 GHz
Pin (1 dB) f = 0.5 to 3.0 GHz
Icont
tSW 50% CTL to 90/10% RF
MIN.
−
−
−
−
−
27
23
21
20
15
15
+14.0
−
−
TYP.
0.25
0.25
0.30
0.35
0.35
30
27
25
24
20
20
+17.0
+17.0
+20.0
MAX.
0.50
0.50
0.55
0.60
0.65
−
−
−
−
−
−
−
−
−
Unit
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
dBm
−
4
20
μA
−
20
200
ns
Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz
2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of linear
range.
3. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system. The range of
recommended DC cut capacitor value is less than 100 pF.
R09DS0050EJ0400 Rev.4.00
Sep 10, 2012
Page 4 of 12