R2A20114BFP Datasheet, PDF (4/17 Pages) Renesas Technology Corp – Continuous Conduction Mode Interleaving PFC Control IC

R2A20114BFP
Absolute Maximum Ratings
Item
Supply voltage
GD1 and GD2
Peak current
DC current
Vref terminal current
Terminal current
RS terminal current
RT terminal current
IRAMP terminal current
Terminal clamp current
Terminal voltage
Vref terminal voltage
CS1 terminal, CS2 terminal voltage
Power dissipation
Operating ambient temperature
Junction temperature
Storage temperature
Symbol
VCC
Ipk-gd1, Ipk-gd2
Idc-gd1, Idc-gd2
Iref
It-group
Irs
Irt
Iramp
Iclamp
Vt-group
Vt-ref
Vt-cs
Pt
Ta-opr
Tj
Tstg
Ratings
-0.3 to +24
±0.2
±0.02
-10
±1
-500
-200
-200
300
-0.3 to Vref
-0.3 to Vref+0.3
-1 to +1
1
-40 to +125
-40 to +150
-55 to +150
Unit
Note
V
3
A
3, 4
A
3
mA
3
mA
3, 5
A
3
A
3
A
3
A
6
V
3, 7
V
3
V
3
W
3, 8
C
C
9
C
Notes
1. Rated voltages are with reference to the AGND and PGND terminals
2. For the direction of rated current, (+) denotes the current flowing into and (-) denotes the current flowing out of
the IC
3. Ambient temperature Ta is 25 degrees centigrade.
4. Transient current when driving a capacitive load
5. Rated current for terminals COMP, CSO1, CSO2
6. Rated current for terminals VAC, FB, BO OVP2
7. Rated current for terminals CS1_GND, CS2_GND, RS, PD, E_OCP, E_OVP, E_PHASE, E-DELAY, OFF,
PWM_IN, PWM_CNTL, RT/SYNC, IRAMP, SYNC-O, CT, COMP, CSO1, CSO2, TIMER, V_CNTL, SS
8. Thermal resistance θja = 85.3°C/W When the IC is mounted on glass epoxy board of 50 x 50 x 1.6 (mm)
9. Stress over the absolute maximum ratings may give a fatal damage to the IC. These values are ratings of the stress
and functional operation of the IC exceeding recommended operating temperature is not included. Leaving in the
conditions of the absolute maximum ratings long time may impact the reliability of the IC.
R03DS0101EJ0100 Rev.1.00
Nov. 8, 2016
Page 4 of 15