R2A20113ASP_16 Datasheet, PDF (4/13 Pages) Renesas Technology Corp – Critical Conduction Mode PFC Control IC

R2A20113ASP
Preliminary
Absolute Maximum Ratings
(Ta = 25°C)
Item
Symbol
Ratings
Unit
Note
Power Supply Voltage
VCC
–0.3 to +24
V
OUT terminal peak current
Ipk-snk-out
0.9
A
3
Ipk-src-out
–0.50
OUT terminal DC current
Idc-snk-out
100
mA
Idc-src-out
–50
COMP terminal current
Icomp
+1
mA
–1
RT terminal current
Irt
–60 to –2
μA
Vref terminal current
Iref
–5
mA
Vref terminal voltage
Vt-ref
–0.3 to Vref + 0.3
V
Vref terminal load capacitor
Cref
0.1 to 1
μF
FB terminal voltage
Vt-fb
–0.3 to +5
V
CS terminal voltage
Vcs
–5 to +0.3
V
Power dissipation
Pt
0.68
W
4
Operating ambient temperature
Ta-opr
–40 to +125
°C
Junction temperature
Tj
–40 to +150
°C
5
Storage temperature
Tstg
–55 to +150
°C
Notes: 1. Rated voltages are with reference to the GND terminal.
2. For rated currents, inflow to the IC is indicated by (+), and outflow by (–).
3. Shows the transient current when driving a capacitive load.
4. In case of R2A20113ASP (SOP): θja = 120°C/W
This value is a thing mounting on 40 × 40 × 1.6 [mm], a glass epoxy board of wiring density 10%.
5. Stresses exceeding the absolute maximum ratings may damage the device.
These are stress ratings only. Functional operation above the recommended operating ambient temperature
range is not implied.
Extended exposure to stresses above the absolute maximum ratings may affect device reliability.
R03DS0026EJ0501 Rev.5.01
Jan 08, 2016
Page 4 of 12