PC4082_15 Datasheet, PDF (4/11 Pages) Renesas Technology Corp – J-FET INPUT DUAL OPERATIONAL AMPLIFIER

µPC4082
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Parameter
Symbol
Ratings
Unit
Voltage between V⁺ and V^{– Note 1}
V⁺ – V^–
–0.3 to +36
V
Differential Input Voltage
VID
Input Voltage^{Note 2}
VI
Output Voltage^{Note 3}
VO
Power Dissipation
C Package^{Note 4}
PT
G2 Package^{Note 5}
Output Short Circuit Duration^{Note 6}
±30
V
V^––0.3 to V⁺ +0.3
V
V^––0.3 to V⁺ +0.3
V
350
mW
440
mW
Indefinite
sec
Operating Ambient Temperature
TA
–20 to +80
°C
Storage Temperature
Tstg
–55 to +125
°C
Notes 1. Reverse connection of supply voltage can cause destruction.
2. The input voltage should be allowed to input without damage or destruction. Even during the transition period of
supply voltage, power on/off etc., this specification should be kept. The normal operation will establish when the
both inputs are within the Common Mode Input Voltage Range of electrical characteristics.
3. This specification is the voltage which should be allowed to supply to the output terminal from external without
damage or destructive. Even during the transition period of supply voltage, power on/off etc., this specification
should be kept. The output voltage of normal operation will be the Output Voltage Swing of electrical
characteristics.
4. Thermal derating factor is –5.0 mV/°C when operating ambient temperature is higher than 55°C.
5. Thermal derating factor is –4.4 mV/°C when operating ambient temperature is higher than 25°C.
6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4 and
Note 5.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Output Current
Capacitive Load (AV = +1, Rf = 0 Ω)
Symbol
MIN.
TYP.
MAX.
Unit
V^±
±5
±16
V
IO
±10
mA
CL
100
pF
2
Data Sheet G15378EJ4V0DS