PC311_15 Datasheet, PDF (4/12 Pages) Renesas Technology Corp – PRECISION VOLTAGE COMPARATOR

µPC311
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Parameter
Symbol
Ratings
Unit
Voltage between V⁺ and V^{– Note 1}
V⁺ − V^–
–0.3 to +36
V
Differential Input Voltage
VID
±30
V
Input Voltage ^{Note 2}
VI
V^––0.3 to V⁺ +0.3
V
Output to Negative Supply Voltage ^{Note 3}
VO − V^–
–0.3 to +40
V
Ground to Negative Supply Voltage ^{Note 3}
VGND − V^–
–0.3 to +30
V
Power Dissipation
C Package ^{Note 4}
PT
350
mW
G2 Package ^{Note 5}
440
mW
Output Short Circuit Duration ^{Note 6}
10
sec
Operating Ambient Temperature
TA
–20 to +80
°C
Storage Temperature
Tstg
–55 to +125
°C
Notes 1. Reverse connection of supply voltage can cause destruction.
2. The input voltage should be allowed to input without damage or destruction. Even during the transition
period of supply voltage, power on/off etc., this specification should be kept. The normal operation will
establish when the both inputs are within the Common Mode Input Voltage Range of electrical
characteristics.
3. This specification is the voltage which should be allowed to supply to the output and GND terminal from
external without damage or destruction. Even during the transition period of supply voltage, power on/off
etc., this specification should be kept.
4. Thermal derating factor is –5.0 mW/°C when operating ambient temperature is higher than 55°C.
5. Thermal derating factor is –4.4 mW/°C when operating ambient temperature is higher than 25°C.
6. Pay careful attention to the total power dissipation not to exceed the absolute maximum ratings, Note 4 and
Note 5.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage (Split)
Supply Voltage (V^– = GND)
Symbol
MIN.
TYP.
MAX.
Unit
V^±
±4
±16
V
V⁺
+5
+32
V
TYPICAL CONNECTIONS
OFFSET VOLTAGE NULL CIRCUIT
V⁺
3 kΩ
3 kΩ
2₊ ⁵ ₆
8
7
3_−
STROBING CIRCUIT
FAST RESPONSE CIRCUIT
(INCREASING INPUT STAGE CURRENT)
2₊
7
3_−
6
4
TTL, CMOS
1 kΩ
V⁺
2+ ⁸ ₆
5
7
3_−
2
Data Sheet G15945EJ4V0DS