M16C26A-TS Datasheet, PDF (4/17 Pages) Renesas Technology Corp – Sample Program (Terminal Software)

ç
5. Operational Specification
The data received from HyperTerminal is displayed.
Communication format
Baud rate: 9,600 bps
(In microcomputer, set at 9,615 bps)
Stop bit: 1
Parity: None
Number of characters received: 16
(Only up to 16 characters are accepted)
Received character codes written in ASCII
Control code
TAB (0x09): Clear
Entire received string is cleared
BS (0x08): Backspace
One character is cleared
M16C/26A Group
Sample Program (Terminal Software)
1) Reset start
2) Character code received
abcde f gh
i
3) BS code received
abcde f gh
4) TAB code received
REJ05B0809-0110 Rev.1.10
2007.12
Page 4 of 17