HA17339A Datasheet, PDF (4/15 Pages) Renesas Technology Corp – Quadruple Comparators

HA17339A Series
Absolute Maximum Ratings
(Ta = 25°C)
Item
Symbol
Ratings
Unit
Power supply voltage
Differential input voltage
Input voltage
Output pin voltage
Output current
Allowable power dissipation
DIP
SOP
TSSOP
V_CC
Vin(diff)
Vin
Vout
Iout *¹
P_T
36
V
±V_CC
V
−0.3 to +V_CC
V
−0.3 to +36
V
20
mA
625 *²
mW
625 *³
400 *⁴
Operating temperature
Topr
−40 to +85
°C
Storage temperature
Tstg
−55 to +125
°C
Notes: 1. These products can be destroyed if the output and V_CC are shorted together. The maximum output current is
the allowable value for continuous operation.
2. HA17339A:
These are the allowable values up to Ta = 50°C. Derate by 8.3 mW/°C above that temperature.
3. HA17339AF/ARP:
When it is mounted on glass epoxy board of 40 mm × 40 mm × 1.6 mmt with 10% wiring density, value at Ta
≤ 25°C. If Ta > 25°C, derated by 6.25 mW/°C.
When it is mounted on glass epoxy board of 40 mm × 40 mm × 1.6 mmt with 30% wiring density. If Ta >
32°C, derated by 6.70 mW/°C.
4. HA17339AT:
These are the allowable values up to Ta = 25°C. Derate by 4 mW/°C above that temperature.
Electrical Characteristics
(V_CC = 5 V, Ta = 25°C)
Item
Symbol Min Typ
Max
Unit
Test Conditions
Input offset voltage
V_IO

2
7
mV Output switching point:
when V_O = 1.4V, R_S = 0Ω
Input offset current
I_IO
Input bias current
I_IB
Common-mode input voltage *¹ V_CM

5
50
nA
 I_IN(+) − I_IN(−) 

25
250
nA
I_IN(+) or I_IN(−)
0

V_CC−1.5
V
Supply current
Voltage Gain *³
Response time *^2,3
I_CC

0.8
2
mA R_L = ∞
A_V
 (200)

V/mV R_L = 15kΩ
t_R
 (1.3)

µs V_RL = 5V, R_L = 5.1kΩ
Output sink current
I_O(sink)
6
16

mA V_IN(−) = 1V, V_IN(+) = 0, V_O ≤ 1.5V
Output saturation voltage
Output leakage current *³
V_O(sat)
I_LO
 200
400
 (0.1)

mV V_IN(−) = 1V, V_IN(+) = 0, Iosink = 3mA
nA V_IN(+) = 1V, V_IN(−) = 0, V_O = 5V
Notes: 1. Voltages more negative than −0.3 V are not allowed for the common-mode input voltage or for either one of
the input signal voltages.
2. The stipulated response time is the value for a 100 mV input step voltage that has a 5 mV overdrive.
3. Design spec.
Rev.3.00 Mar 10, 2006 page 4 of 14