M35074 Datasheet, PDF (30/44 Pages) Renesas Technology Corp – SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS

MITSUBISHI MICROCOMPUTERS
M35074-XXXSP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
ABSOLUTE MAXIMUM RATINGS (VDD = 5.00V, Ta = –20 to +85°C, unless otherwise noted)
Symbol
VDD
VI
VO
Pd
Topr
Tstg
Parameter
Supply voltage
Input voltage
Output voltage
Power dissipation
Operating temperature
Storage temperature
Conditions
With respect to VSS.
Ta = +25 °C
Ratings
Unit
–0.3 to +6.0
V
VSS –0.3 ≤ VI ≤ VDD +0.3 V
VSS ≤ VO ≤ VDD
V
+300
mW
–20 to +85
°C
–40 to +125
°C
RECOMMENDED OPERATING CONDITIONS (VDD = 5.00V, Ta = –20 to +85°C, unless otherwise noted)
Symbol
VDD
VIH
VIL
Parameter
Supply voltage
"H" level input voltage
"L" level input voltage
5V
3.3V
__ __
AC, CS, HOR, VERT
SCK/SCL, SIN/SDA
__ __
AC, CS, HOR, VERT
SCK/SCL, SIN/SDA
Min.
4.75
3.00
0.8 ✕ VDD
0.7 ✕ VDD
0
0
Limits
Typ.
5.00
3.30
VDD
VDD
0
0
Unit
Max.
5.25
V
3.60
V
VDD
V
VDD
V
0.2 ✕ VDD V
0.3 ✕ VDD V
FOSC
H.sync
Oscillating frequency
for display
External clock mode 1
External clock mode 2
Internal clock mode
Horizontal synchronous signal input frequeney
VDD=4.75 to 5.25V
VDD=3.00 to 3.60V
VDD=4.75 to 5.25V
VDD=4.75 to 5.25V
VDD=4.75 to 5.25V
VDD=3.00 to 3.60V
6.3
–
80.0 MHz
6.3
–
40.0 MHz
20.0
–
120.0 MHz
20.0
–
120.0 MHz
15.0
–
130.0 kHz
15.0
–
60.0
kHz
ELECTRICAL CHARACTERISTICS 1 VDD = 5V (VDD = 5.00V, Ta = 25°C, unless otherwise noted)
Symbol
VDD
IDD
VOH
VOL
RI
VTCK
Parameter
Supply voltage
Supply current
"H" level output voltage
P0 to P7 (Note1)
CPOUT
P0 to P7 (Note2)
"L" level output voltage _CPOUT
SIN/SDA
__ __
Pull-up resistance AC, CS
External clock input width
Test conditions
Ta = –20 to +85°C
VDD = 5.00V
VDD = 4.75V, IOH = -0.4mA
VDD = 4.75V, IOH = -0.05mA
VDD = 4.75V, IOL = 0.4mA
VDD = 4.75V, IOL = 0.05mA
VDD = 4.75V, IOL = 3.0mA
VDD = 5.00V
4.75V ≤ VDD ≤ 5.25V
Limits
Unit
Min. Typ. Max.
4.75 5.0 5.25
V
—
40
60 mA
3.5 —
—
V
—
— 0.4
V
10
30 100 kΩ
0.6 ✕ VDD — 0.9 ✕ VDD V
Notes 1: The current from the IC must not exceed – 0.4 mA/port at any of the port pins (P0 to P7).
2: The current flowing into the IC must not exceed 0.4 mA/port at any of port pins (P0 to P7).
29