PD5713TK Datasheet, PDF (3/14 Pages) Renesas Technology Corp – WIDE BAND SPDT SWITCH

μPD5713TK
ELECTRICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, DC cut capacitors = 1 000 pF, unless
otherwise specified)
Parameter
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Isolation 3
Input Return Loss
Output Return Loss
0.1 dB Loss Compression
Input Power ^{Note 1}
1 dB Loss Compression
Input Power ^{Note 2}
Supply Current
Switch Control Current
Switch Control Speed
Symbol
Test Conditions
Lins1 f = 0.05 to 1.0 GHz
Lins2 f = 1.0 to 2.0 GHz
Lins3 f = 2.0 to 2.5 GHz
ISL1 f = 0.05 to 1.0 GHz
ISL2 f = 1.0 to 2.0 GHz
ISL3 f = 2.0 to 2.5 GHz
RLin f = 0.05 to 2.5 GHz
RLout f = 0.05 to 2.5 GHz
Pin (0.1 dB) f = 1.0 GHz
Pin (1 dB) f = 1.0 GHz
IDD VDD = Vcont = 2.8 V, RF off
Icont VDD = Vcont = 2.8 V, RF off
tSW f = 1.0 GHz
MIN.
−
−
−
30
22
20
13
13
+13.0
TYP.
0.6
0.8
0.95
32.5
25
22.5
17
17
+17.0
MAX.
0.8
1.0
1.2
−
−
−
−
−
−
Unit
dB
dB
dB
dB
dB
dB
dB
dB
dBm
−
+21.0
−
dBm
−
0.01
1.0
μA
−
0.01
1.0
μA
−
30
100
ns
Notes 1. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
2. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system.
Data Sheet PU10627EJ01V0DS
3