M35061 Datasheet, PDF (27/40 Pages) Mitsubishi Electric Semiconductor – SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS

MITSUBISHI MICROCOMPUTERS
M35061-XXXSP/FP
SCREEN CHARACTER and PATTERN DISPLAY CONTROLLERS
Address
00016
*Jump to address 000 16
automatically
*Jump to address 310 16
automatically
*Jump to address 320 16
automatically
*Jump to address 360 16
automatically
2A716
2A816
2B016
2B116
2FF16
30016
30D16
31016
31D16
32016
35D16
36016
36D16
display RAM
register
unused address area
SYRAM code 00 16
unused address area
SYRAM code 01 16
unused address area
unused address area
SYRAM code 06 16
Address setting and data input disable area
FFF16
Following FFF16 is disabled
When entering data, note that although addresses are incremented every data entry (8 bits ✕ 3), if an address value falls in the unused
address area, it is automatically converted to the address value indicated by the arrow. When entering SYRAM data, for example, you
can set this data simply by setting address 30016 first and then entering data 30016 to 30C16 (SYRAM code 0016) and next data 31016 to
31C16 (SYRAM code 0116). The same applies for SYRAM code 0216 to 0616.However, set CS to H after setting SYRAM code 0616 (36016
to 36C16).
Fig. 12 Address construction
26