R5F213J2CNNP Datasheet, PDF (26/57 Pages) Renesas Technology Corp – RENESAS MCU

R8C/3JC Group
4. Special Function Registers (SFRs)
Table 4.12 SFR Information (12) ⁽¹⁾
Address
Register
2CF0h DTC Control Data 22
2CF1h
2CF2h
2CF3h
2CF4h
2CF5h
2CF6h
2CF7h
2CF8h DTC Control Data 23
2CF9h
2CFAh
2CFBh
2CFCh
2CFDh
2CFEh
2CFFh
2D00h
:
2FFFh
X: Undefined
Note:
1. The blank areas are reserved and cannot be accessed by users.
Symbol
DTCD22
DTCD23
After Reset
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
XXh
Table 4.13 ID Code Areas and Option Function Select Area
Address
Area Name
Symbol
After Reset
:
FFDBh
:
Option Function Select Register 2
OFS2
(Note 1)
FFDFh ID1
:
(Note 2)
FFE3h ID2
:
FFEBh ID3
:
FFEFh ID4
(Note 2)
(Note 2)
(Note 2)
:
FFF3h ID5
(Note 2)
:
FFF7h ID6
(Note 2)
:
FFFBh ID7
:
(Note 2)
FFFFh Option Function Select Register
OFS
(Note 1)
Notes:
1.
2.
The option function select area is allocated in the flash memory, not in the SFRs. Set appropriate values as ROM data by a program.
Do not write additions to the option function select area. If the block including the option function select area is erased, the option function select
area is set to FFh.
When blank products are shipped, the option function select area is set to FFh. It is set to the written value after written by the user.
When factory-programming products are shipped, the value of the option function select area is the value programmed by the user.
The ID code areas are allocated in the flash memory, not in the SFRs. Set appropriate values as ROM data by a program.
Do not write additions to the ID code areas. If the block including the ID code areas is erased, the ID code areas are set to FFh.
When blank products are shipped, the ID code areas are set to FFh. They are set to the written value after written by the user.
When factory-programming products are shipped, the value of the ID code areas is the value programmed by the user.
REJ03B0302-0100 Rev.1.00
May 25, 2010
Page 26 of 54