PD16448A_15 Datasheet, PDF (24/26 Pages) Renesas Technology Corp – SOURCE DRIVER FOR 240-OUTPUT TFT-LCD (NAVIGATION, AUTOMOBILE LCD-TV)

µPD16448A
4. RECOMMENDED CONDITIONS FOR INSTALLATION
This product should be installed under the following recommended conditions. Consult one of our sales
representatives for installation under conditions other than those recommended.
Installation Condition
Thermocompression
bonding
Installation Method
Soldering
ACF (sheet type adhesive agent)
Condition
Heat with heating tool at 300 °C to 350 °C under pressure of 100 g
(per pin) for 2 to 3 seconds
Temporary adhesion at 70 °C to 100 °C under pressure of 3 to
8 kg/cm² for 3 to 5 seconds
Permanent adhesion at 165 °C to 180 °C under pressure of 25 to
45 kg/cm² for 30 to 40 seconds
(when aeolotropic conductive film SUMIZAC 1003 from Sumitomo
Bakelite Co., Ltd. is used)
Caution For installation conditions for the ACF part, contact the ACF manufacturer beforehand. Do not mix
different installation methods.
22