RX63T64 Datasheet, PDF (2/8 Pages) Renesas Technology Corp – Renesas Starter Kit Sample

RX63T(64-pin)
Renesas Starter Kit Sample Code for CubeSuite+
1. Installing CubeSuite+
If you have not installed CubeSuite+, download the latest version of CubeSuite+ for installation from the link below.
http://www.renesas.com/cubesuite+_download
2. Starting the CubeSuite+ Project
Select the file below by double-clicking on its name (shown below) or clicking on the [GO] button in the [Open
Existing Project] area in the start panel of CubeSuite+.
<Folder where the sample code was unzipped>\ an_r20an0275je0100_rx63t_rsk \63trsk\63TRSK\63TRSK.mtpj
3. Selecting a Sub-Project (When Using the Sample Code)
The sample code is provided in sub-projects for individual tutorials and peripheral functions.
After starting the project, the next step is to make the sub-project for the tutorial or peripheral function you would like
to use active in accord with the steps shown below.
3.1 How to Make a Sub-Project Active
Select the sub-project for a tutorial or peripheral function you would like to use from the Project Tree and right-click on
it to open the context menu. Then, select [Set sub as Active Project].
The name of the active sub-project is underlined in the Project Tree.
Active Project
R20AN0275EJ0100 Rev. 1.00
Jan. 17, 2014
Page 2 of 6