BCR25FM-12LB_15 Datasheet, PDF (2/8 Pages) Renesas Technology Corp – 600V - 25A - Triac Medium Power Use

BCR25FM-12LB
Preliminary
Electrical Characteristics
Parameter
Symbol Min. Typ. Max. Unit
Test conditions
Repetitive peak off-state current
I_DRM
—
—
3.0
mA Tj = 125°C, V_DRM applied
—
—
5.0
mA Tj = 150°C, V_DRM applied
On-state voltage
V_TM
—
—
1.5
V
Tc = 25°C, I_TM = 40 A,
instantaneous measurement
Gate trigger voltage^Note2
Ι
V_FGTΙ
—
—
2.0
V Tj = 25°C, V_D = 6 V, R_L = 6 Ω,
ΙΙ
V_RGTΙ
—
—
2.0
V
R_G = 330 Ω
ΙΙΙ
V_{RGTΙΙΙ}
—
—
2.0
V
Gate trigger curent^Note2
Ι
I_FGTΙ
—
—
50
mA Tj = 25°C, V_D = 6 V, R_L = 6 Ω,
ΙΙ
I_RGTΙ
—
—
50
mA ^RG ^{= 330 Ω}
ΙΙΙ
I_{RGTΙΙΙ}
—
—
50
mA
Gate non-trigger voltage
V_GD
0.2
—
—
V
Tj = 125°C, V_D = 1/2 V_DRM
Thermal resistance
0.1
—
—
V
Tj = 150°C, V_D = 1/2 V_DRM
R_{th (j-c)}
—
—
2.8
°C/W Junction to case^Note3
Critical-rate of rise of off-state
(dv/dt)c 10
—
—
V/μs Tj = 125°C
commutation voltage^Note4
1
—
—
V/μs Tj = 150°C
Notes: 1. Gate open.
2. Measurement using the gate trigger characteristics measurement circuit.
3. The contact thermal resistance R_{th (c-f)} in case of greasing is 0.5°C/W.
4. Test conditions of the critical-rate of rise of off-state commutation voltage is shown in the table below.
5. Make sure that your finished product containing this device meets your safe isolation requirements.
For safety, it's advisable that heatsink is electrically floating.
Test conditions
1. Junction temperature
Tj = 125°C/150°C
2. Rate of decay of on-state commutating current
(di/dt)c = –13 A/ms
3. Peak off-state voltage
V_D = 400 V
Commutating voltage and current waveforms
(inductive load)
Supply Voltage
Time
Main Current
Main Voltage
(dv/dt)c
(di/dt)c
Time
Time
V_D
R07DS0964EJ0100 Rev.1.00
Feb 28, 2014
Page 2 of 7