R0E00008AKCE00EP49 Datasheet, PDF (16/37 Pages) Renesas Technology Corp – Microcomputer Development Environment System

E8a emulator
5. Emulator Debugger Setting
5.3 [Firmware Location] tab
You can specify the address of the firmware location in the [Firmware Location] tab.
[Firmware Location]
Select the area in which the firmware is located.
Specify the address that will not be used by the
user system in the ROM area or RAM area.
- Program
Specify the ROM area in which the firmware
is located. Specify 2K bytes that will not be
used by the user system. [*1]
Figure 5.3 [Firmware Location] tab of [Emulator Setting] Dialog Box
Note
[*1] When using the MCU whose ROM size is other than 128 KB, the options in this [Firmware Location] tab are
displayed in gray because this setting is unnecessary.
REJ10J1829-0101 Rev.1.01 July 03, 2009
Page 16 of 37