M306H1SFP Datasheet, PDF (156/243 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA SLICER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306H1SFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
with DATA SLICER and ON-SCREEN DISPLAY CONTROLLER
G1 character composition
Set G1 character by display RAM G1 character bit (G0 to G5) and G1 character form bit(G6). G1
character composition is shown in Figure 2.15.9. G1 character is divided to 6 blocks (refer to Figure
2.15.9), and set character by G0 to G5 in each block. Also, G1 character form is set by G6.
Can display 64 patterns G1 character by using G0 to G5. G1 character composition is shown in Figure
2.15.10.
12dots
G0 G1
G2 G3
G4 G5
3dots
4dots
3dots
6dots 6dots
Figure 2.15.9 G1 character composition
Example1:G0,G1,G5=1,G2,G3,G4=0
G6=0
(Contiguous
form)
12 dots
Example2:G3,G4=1,G0,G1,G2,G5=0
12 dots
G6=1
(Separated
form)
12 dots
12 dots
Figure 2.15.10 G1 character setting
Rev. 1.0
Set 0 to G0 to G5 when use font RAM code 0016 as normal character.
However, SYRAM can not be displayed.
155