M37754M6C-XXXGP Datasheet, PDF (10/14 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

PRELIMINARY _{NSootimcee: pTahriasmisentroict} ^{alimfinitsalasrpeescuifbicjeactitotno. change.}
ELECTRICAL CHARACTERISTICS
The M37754M6C-XXXGP and M37754M6C-XXXHP have the same
function as the M37754M8C-XXXGP and M37754M8C-XXXHP in
the following :
(1) ABSOLUTE MAXIMUM RATINGS
(2) RECOMMENDED OPERATING CONDITIONS
(3) ELECTRICAL CHARACTERISTICS
(4) PERIPHERAL DEVICE INPUT/OUTPUT TIMING
(5) TIMING REQUIREMENTS
(6) SWITCHING CHARACTERISTICS
Therefore, refer to the correponding section on the M37754M8C-
XXXGP.
ADDRESSING MODES AND INSTRUCTION SET
The M37754M6C-XXXGP and M37754M6C-XXXHP have 29 pow-
erful addressing modes; 1 addressing mode is added to the basis of
the 7700 series. Refer to the “7751 Series Software Manual” for the
details.
INSTRUCTION SET
The M37754M6C-XXXGP and M37754M6C-XXXHP have the ex-
tended instruction set; 6 instructions are added to the instruction set
of 7700 series. The object code of this extended instruction set is
upwards compatible to that of 7700 series instruction set.
Refer to the “7751 Series Software Manual” for the details.
SHORTENING NUMBER OF INSTRUCTION
EXECUTION CYCLES
Shortening number of instruction execution cycles is realized in the
M37754M6C-XXXGP and M37754M6C-XXXHP owing to modifica-
tions of the instruction execution algorithm and the CPU circuit, and
others.
Refer to the “7751 Series Software Manual” about the number of
instruction execution cycles.
DATA REQUIRED FOR MASK ROM ORDERING
Please send the following data for mask orders:
<M37754M6C-XXXGP>
(1) M37754M6C-XXXGP mask ROM order confirmation form
(2) 100P6S mark specification form
(3) ROM data (EPROM 3 sets)
<M37754M6C-XXXHP>
(1) M37754M6C-XXXHP mask ROM order confirmation form
(2) 100P6Q mark specification form
(3) ROM data (EPROM 3 sets)
MITSUBISHI MICROCOMPUTERS
M37754M6C-XXXGP
M37754M6C-XXXHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
9