UPD5754T7A Datasheet, PDF (1/14 Pages) Renesas Technology Corp – SiGe/CMOS Integrated Circuit 4 * 2 IF Switch Matrix with Gain and Tone

PreliminaryData Sheet
μPD5754T7A
R09DS0012EJ0100
SiGe/CMOS Integrated Circuit
Rev.1.00
Dec 22, 2010
4 × 2 IF Switch Matrix with Gain and Tone/Voltage Controller
FEATURES
• 4 independent IF channels, integral switching to channel input to either channel output
• 4 × 2 switch matrix with integrated IF amplifier and switch control - Tone/Voltage
- Switch’s Enable mode is linked V_CC external pins
• Mirror reversal logic pattern of μPD5739T7A
• Frequency range
: f = 950 MHz to 2 150 MHz
• High isolation
: ISL_D/U = 30 dB TYP. @Worst mode
• Power gain
• Power gain flatness
: G_P = 18 dB TYP. @ Z_S = Z_L = 50 Ω
: ΔG_P = 1.0 dB TYP.
• Surface mounting
: 28-pin 5 × 5 mm square micro lead package (28-pin plastic QFN (0.5 mm pitch))
APPLICATIONS
• DBS IF switching
• Multiswitch, Switch box
• 4 × 2 switching application for microwave signal
ORDERING INFORMATION
Part Number
Order Number
Package
Marking
Supplying Form
μPD5754T7A-E1 μPD5754T7A-E1-A 28-pin plastic QFN D5754 • Embossed tape 12 mm wide
(0.5 mm pitch)
(Pb-Free)
• Pin 8 to 14 face the perforation side of the
tape
• Qty 2.5 kpcs/reel
• Dry packing specification (MSL 3 Equivalent)
Remark To order evaluation samples, please contact your nearby sales office.
Part number for sample order: μPD5754T7A
CAUTION
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
R09DS0012EJ0100 Rev.1.00
Dec 22, 2010
Page 1 of 12