UPD5753T7G Datasheet, PDF (1/15 Pages) Renesas Technology Corp – SiGe/CMOS Integrated Circuit

PreliminaryData Sheet
μPD5753T7G
SiGe/CMOS Integrated Circuit
4 × 2 IF Switch Matrix with Tone/Voltage Controller
R09DS0014EJ0100
Rev.1.00
Feb 22, 2011
FEATURES
• 4 independent IF channels, integral switching to channel input to either channel output
• 4 × 2 switch matrix with integrated switch control - Tone/Voltage
- Switch’s Enable/Disable function is linked with POLA input voltage level
• Switch’s Enable condition : V_POLA > 9.5 V
• Frequency range
: f = 250 MHz to 2150 MHz
• High isolation
: ISL_D/U = 33 dB TYP. @Worst mode
• Insertion loss
• Insertion loss flatness
: L_INS = 7 dB TYP. @ Z_S = Z_L = 50 Ω
: ΔL_INS = 1.0 dB TYP.
• 20-pin 4 × 4 mm square micro lead package ( 20-pin plastic QFN (0.5 mm pitch))
APPLICATIONS
• DBS IF switching
• Multiswitch, Switch box
• 4 × 2 switching application for microwave signal
ORDERING INFORMATION
Part Number
Order Number
Package
Marking
Supplying Form
μPD5753T7G-E1 μPD5753T7G-E1-A 20-pin plastic QFN D5753 • Embossed tape 12 mm wide
(0.5 mm pitch)
(Pb-Free)
• Pin 6 to 10 face the perforation side of the tape
• Qty 5 kpcs/reel
• Dry packing specification (MSL 3 Equivalent)
Remark To order evaluation samples, please contact your nearby sales office.
Part number for sample order: μPD5753T7G
CAUTION
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
R09DS0014EJ0100 Rev.1.00
Feb 22, 2011
Page 1 of 13