|
UPD5739T7A Datasheet, PDF (1/14 Pages) Renesas Technology Corp – SiGe/CMOS Integrated Circuit 4×2 IF Switch Matrix with Gain and Tone/Voltage Controller | |||
|
PreliminaryData Sheet
μPD5739T7A
R09DS0002EJ0100
SiGe/CMOS Integrated Circuit
Rev.1.00
Jul 6, 2010
4 Ã 2 IF Switch Matrix with Gain and Tone/Voltage Controller
FEATURES
⢠4 independent IF channels, integral switching to channel input to either channel output.
⢠4 à 2 switch matrix with integrated IF amplifier and switch control - Tone/Voltage.
- Switchâs Enable mode is linked VCC external pins.
⢠Frequency range
: f = 950 MHz to 2 150 MHz
⢠High isolation
: ISLD/U = 30 dB TYP. @Worst mode
⢠Power gain
⢠Power gain flatness
: GP = 18 dB TYP. @ ZS = ZL = 50 Ω
: ÎGP = 1.0 dB TYP.
⢠Surface mounting
: 28-pin 5 Ã 5 mm square micro lead package (28-pin plastic QFN (0.5 mm pitch))
APPLICATIONS
⢠DBS IF switching
⢠Multiswitch, Switch box
⢠4 à 2 switching application for microwave signal
ORDERING INFORMATION
Part Number
Order Number
Package
Marking
Supplying Form
μPD5739T7A-E1 μPD5739T7A-E1-A 28-pin plastic QFN D5739 ⢠Embossed tape 12 mm wide
(0.5 mm pitch)
(Pb-Free)
⢠Pin 8 to 14 face the perforation side of the
tape
⢠Qty 2.5 kpcs/reel
⢠Dry packing specification (MSL 3 Equivalent)
Remark To order evaluation samples, please contact your nearby sales office.
Part number for sample order: μPD5739T7A
CAUTION
Observe precautions when handling because these devices are sensitive to electrostatic discharge.
R09DS0002EJ0100 Rev.1.00
Jul 6, 2010
Page 1 of 12
|
▷ |