UPD166029T1J Datasheet, PDF (1/42 Pages) Renesas Technology Corp – INTELLIGENT POWER DEVICE

Datasheet
µPD166029T1J
INTELLIGENT POWER DEVICE
R07DS1163EJ0200
Rev.2.00
May 22, 2015
1. Overview
1.1 Description
Family:
µPD166029T1J is part of 2nd Generation Intelligent Power Devices (IPD). They are N-channel high-side switches with
charge pump, voltage controlled input, diagnostic feedback with proportional load current sense and embedded
protection function. Family includes up to 14 devices depending on on-state resistance, package and channel number
combination.
Scalability:
Variety of on-state resistance combined with standardized package on pin-out give user high flexibility for unit design
depending on target load.
Robustness:
Because of advanced protection method, 2nd Generation Intelligent Power Devices achieve high robustness against
long term and repetitive short circuit condition.
1.2 Features
• Built-in charge pump
• 3.3V compatible logic interface
• Low standby current
• Short circuit protection
 Shutdown by over current detection
 Power limitation protection by over load detection (Power limitation: current limitation with delta Tch control)
 Absolute Tch over temperature protection
• Built-in diagnostic function
 Proportional load current sensing
 Defined fault signal in case of abnormal load condition
 Loss of ground protection
• Under voltage lock out
• Active clamp operation at inductive load switch off
• AEC Qualified
• RoHS compliant
1.3 Application
• Light bulb switching from 5W to 10W
• Switching of all types of 14V DC grounded loads, such as LED, inductor, resistor and capacitor
• Power supply switch, fail-safe switch of 14V DC grounded system
Note: The information contained in this document is the one that was obtained when the document was issued,
and may be subject to change.
R07DS1163EJ0200 Rev.2.00
May 22, 2015
Page 1 of 40