SEAL100FP Datasheet, PDF (1/4 Pages) Renesas Technology Corp – Sealed Conversion Board for Converting from 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC (100D0) to 100-pin Standard Pitch

SEAL100FP
Sealed Conversion Board for Converting from 100-pin 0.65mm-pitch QFP
(100P6S-A) or LCC (100D0) to 100-pin Standard Pitch
Function
The SEAL100FP is a board for converting the foot pattern of an
MCU with a 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC
(100D0) package to the standard pitch. Also, this board converts a
100P6S-A or 100D0 IC socket foot pattern to the standard pitch.
Application
The SEAL100FP is a standard pitch converter that is sealed on its
reverse side. It is used to connect an MCU or IC socket with a
100P6S-A or 100D0 package to a standard-pitch universal board,
etc. Since there is a mounting pattern for flat packages on the board,
it allows mask-ROM or PROM MCUs or 100-pin QFP/LCC IC
sockets to be mounted in place directly.
Dimensions
50.80(D)×43.18(W)×0.17(T)mm
Foot Pattern Reference Dimensions
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.