RD30LDT3595 Datasheet, PDF (1/7 Pages) Renesas Technology Corp – 24-bit Serial-in Parallel-out LED Driver IC

RD30LDT3595
24–bit Serial–in Parallel–out LED Driver IC
REJ03D0896-0300
Rev.3.00
Jun 16, 2008
Description
The RD30LDT3595 has twenty-four edge trigger D–type Flip–Flops with twenty-four latches in 36–pin package. Data
is input to the serial data input and the clock pulse is input to the clock input. When the clock is changed from ”L”
to ”H”, the signal of the data input enters an internal shift register. The data of the shift register is shifted one by one. In
addition, output load circuit is added so that power supply prevents a wrong action in on/off. When Vcc is less than a
fixed level, the output (Q1 to Q24) compulsorily is off state. Low–voltage and high–speed operation is suitable for
battery–powered product (e.g., notebook computers), and the low–power consumption extends the battery life.
Features
• Supply voltage range : 4.5 to 5.5 V, V_O = 30 V
• Output current : I_O = 100 mA (@V_CC = 5 V)
• All the logical input has hysteresis voltage for the slow transition.
• Input with pull-up resistance. (Enable, Latch terminal)
• Input with pull-down resistance. (CLK, S-in terminal)
• Ordering Information
Part Name
Package Code
Package Taping Abbreviation
Package Type
(Previous Code) Abbreviation
(Quantity)
RD30LDT3595FPH0
SSOP-36 pin
PRSP0036GA-A
(36P2R-A)
FP
H (1,000 pcs/reel)
Surface
Treatment
0 (Sn-Cu)
REJ03D0896-0300 Rev.3.00 Jun 16, 2008
Page 1 of 6