R2A20133DSP_15 Datasheet, PDF (1/14 Pages) Renesas Technology Corp – Critical Conduction Mode PFC Control IC

Preliminary Datasheet
R2A20133DSP
Critical Conduction Mode PFC Control IC
R03DS0052EJ0300
Rev.3.00
Feb 27, 2013
Description
The R2A20133D controls a boost converter to provide an active power factor correction.
The R2A20133D adopts critical conduction mode for power factor correction and realizes high efficiency and a low
switching noise by zero current switching.
Because the zero current is detected by using the GND current, the ZCD Auxiliary winding is unnecessary.
The feedback loop open detection, two mode overvoltage protection, overcurrent protection are built in the R2A20133D,
and can constitute a power supply system of high reliability with few external parts.
Features
 Absolute Maximum Ratings
 Supply voltage Vcc: 24 V
 Operating junction temperature Tjopr: –40 to +150°C
 Electrical characteristics
 UVLO operation start voltage VH: 9.5 V  0.7 V
 UVLO operation shutdown voltage VL: 8.5 V  0.4 V
 UVLO hysteresis voltage Hysuvl: 1.0 V  0.4 V
 Functions
 Boost converter control with critical conduction mode
 Two mode overvoltage protection and OVP2
Mode 1: Dynamic OVP corresponding to a voltage rise by load change
Mode 2: Static OVP corresponding to overvoltage in stable.
OVP2: OVP2 senses the PFC output voltage by independence pin.
 Feedback loop, open detection
 Overcurrent protection
 Dynamic UVP corresponding to a voltage fall by load change
 Frequency limiter, adjustable
 Zero Current Detect (ZCD) delay time, adjustable
 CS pin's open detection
 Package lineup: Pb-free SOP-8 (JEDEC)
Ordering Information
Part No.
R2A20133DSP#W5
Package Name
—
Package Code
PRSP0008DJ-A
Package
Abbreviation
SP
Taping Abbreviation
(Quantity)
W (2,500 pcs/reel)
R03DS0052EJ0300 Rev.3.00
Feb 27, 2013
Page 1 of 13