|
R2A20131SP_15 Datasheet, PDF (1/9 Pages) Renesas Technology Corp – Continuous Conduction Mode PFC Control IC | |||
|
Preliminary Datasheet
R2A20131SP
Continuous Conduction Mode PFC Control IC
R03DS0032EJ0200
Rev.2.00
Mar 05, 2012
Description
The R2A20131 is power factor correction control IC of continuous conduction mode.
The R2A20131 is built in Load Tracing Boost, Brownout, Over Voltage Protection, Over Current Protection, FeedBack
loop Open detection and Power Good Function.
Load tracing boost function bring improvement of efficiency at light load with few external parts.
The feedback loop open detection, and over current protection are built in the R2A20131, and can constitute a power
supply system of high reliability with few external parts.
Power Good Function monitors PFC output voltage and can adjust no-good level.
Features
ï· Absolute Maximum Ratings
ï¾ Supply voltage Vcc: 24 V
ï¾ Operating junction temperature Tjopr: â40 to +150°C
ï· Electrical Characteristics
ï¾ Error amplifier reference voltage Vfb: 2.51 V ï± 1.5%
ï¾ UVLO operation start voltage Vuvlh: 10.5 V ï± 0.7 V
ï¾ UVLO operation shutdown voltage Vuvll: 9.3 V ï± 0.5 V
ï¾ UVLO hysteresis voltage Hysuvl: 1.2 V ï± 0.5 V
ï· Functions
ï¾ Boost converter control with continuous conduction mode
ï¾ Load Tracing Boost (LTB) function: Vout is decreased at light load and AC 100 V system.
ï¾ Brownout function
ï¾ Over Voltage Protection
ï¾ Feedback loop Open detection
ï¾ Over Current Protection
ï¾ Power good information (Open drain output)
ï¾ Package: Pb-free SOP-16
This Device uses Halogen-Free Molding Compound
Ordering Information
Part No.
R2A20131SP#W0
Package Name
â
Package Code
PRSP0016DH-B
Package
Abbreviation
SP
Taping Abbreviation
(Quantity)
W (2,000 pcs/reel)
R03DS0032EJ0200 Rev.2.00
Mar 05, 2012
Page 1 of 8
|
▷ |