PS9309L Datasheet, PDF (1/14 Pages) Renesas Technology Corp – LOW IF TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER

Preliminary Data Sheet
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
LOW IF TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER
R08DS0047EJ0001
Rev.0.01
Feb 20, 2012
DESCRIPTION
The PS9309L and PS9309L2 are optical coupled high-speed, totem pole output (active high output type) isolators
containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one
chip.
The PS9309L and PS9309L2 are specified high CMR and pulse width distortion with operating temperature. It is
suitable for IPM drive.
The PS9309L is lead bending type (Gull-wing) for surface mounting. The PS9309L2 is lead bending type for long
creepage distance (Gull-wing) for surface mount.
FEATURES
• High common mode transient immunity (CM_H, CM_L = ±15 kV/μs MIN.)
• Half size of 8-pin DIP
• Pulse width distortion (|t_PLH − t_PHL| = 80 ns MAX.)
• High isolation voltage (BV = 5 000 Vr.m.s.)
• Totem pole output (Active High Output Type)
• Embossed tape product : PS9309L-E3, PS9309L2-E3: 2 000 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• SEMKO approved: No. 1115598
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option)
PIN CONNECTION
(Top View)
654
1. Anode
2. NC
3. Cathode
4. GND
5. VO
6. VCC
123
APPLICATIONS
• IPM Driver
• General purpose inverter
R08DS0047EJ0001 Rev.0.01
Feb 20, 2012
Page 1 of 12