|
PC393MF-DAA_15 Datasheet, PDF (1/9 Pages) Renesas Technology Corp – Bipolar Analog Integrated Circuit | |||
|
μ PC393MF-DAA
Bipolar Analog Integrated Circuit
Preliminary Data Sheet
R03DS0006EJ0100
Rev.1.00
Aug 04, 2010
Description
The μ PC393MF-DAA is dual comparator which is designed to operate for a single power supply. It includes features
of low-voltage operation, a common-mode input voltage that range from Vâ (GND) level, an open collector output, and
low current consumption. Furthermore, this product can operate on a split power supply and be used for an extensive
comparison of various voltages.
This package becomes smaller than μ PC393G2 package in existence because the package adopts the narrow body SOP
that is generally used abroad.
Features
⢠The package is compliant with a JEDEC standard (MS-012).
⢠Thermal resistance was improved more than 30% from existing μ PC393G2 by adopting copper-based lead material.
(Rth(j-a) = 156°C/W)
⢠Wider Operating Ambient Temperature range than μ PC393G2
⯠μ PC393MF-DAA (TA = â40 to +85°C), μ PC393G2 (TA = â20 to +80°C)
⢠Input Offset Voltage
±2 mV (TYP.)
⢠Input Bias Current
17 nA (TYP.)
⢠A low voltage operation is possible.
V+ â Vâ: +2 to +32 V
⢠Pulse Response Time
1.8 μ s (TYP.)
⢠A wired OR is possible as the open collector is output.
Ordering Information
Part No.
μ PC393MF-DAA-E1-ATâ1
Package
8-pin plastic SOP (3.9 Ã 4.9)
Package Type
⢠12 mm wide embossed taping
⢠Pin 1 on draw-out side
μ PC393MF-DAA-E2-ATâ1
8-pin plastic SOP (3.9 Ã 4.9)
⢠2500 p/reel
⢠12 mm wide embossed taping
⢠Pin 1 at take-up side
⢠2500 p/reel
Note: â1.Pb-free (This product does not contain Pb in the external electrode and other parts.)
CAUTION
Do not use the products in applications such as the transportation equipment (a car, a train, a
ship, etc.) where "Special quality grade" is required, because the products are placed in a
quality grade "standard" to be required at general devices.
R03DS0006EJ0100 Rev.1.00
Aug 04, 2010
Page 1 of 7
|
▷ |