M62333P Datasheet, PDF (1/10 Pages) Mitsubishi Electric Semiconductor – 8-BIT 3CH I2C BUS D-A CONVERTER WITH BUFFER AMPLIFIERS

M62333P/FP, M62338P/FP
8-bit 3ch I²C BUS D/A Converter with Buffer Amplifiers
REJ03D0865-0300
Rev.3.00
Jun 15, 2007
Description
The M62333/M62338 is an integrated circuit semiconductor of CMOS structure with 3 channels of built in D/A
converters with output buffer operational amplifiers.
The input is 2-wires serial method is used for the transfer format of digital data to allow connection with a
microcomputer with minimum wiring.
The output buffer operational amplifier employs AB class output circuit with sync and source drive capacity of 1.0 mA
or more, and it operates in the whole voltage range from V_CC to ground.
The M62333 and the M62338 differ only in their slave address.
Features
• Digital data transfer format: I²C BUS serial data method
• Output buffer operational amplifier: It operates in the whole voltage range from V_CC to ground.
• High output current drive capacity: ±1.0 mA over
Application
Conversion from digital data to analog control data for home-use and industrial equipment.
Signal gain control or automatic adjustment of Display-monitor or CTV.
Block Diagram
V_CC
8
SCL
SDA
GND
7
6
5
Power on
reset
I²C BUS transceiver
Channel
decoder
8
8-bit latch
8-bit latch
8-bit latch
8-bit upper
segment R-2R
8-bit upper
segment R-2R
8-bit upper
segment R-2R
+−
+−
+−
1
2
3
A_O1
A_O2
A_O3
REJ03D0865-0300 Rev.3.00 Jun 15, 2007
Page 1 of 9