|
M61508FP Datasheet, PDF (1/25 Pages) Mitsubishi Electric Semiconductor – THE ELECTRIC VOLUME of BUILD-IN NON FADER VOLUME with TONE CONTROL | |||
|
M61508FP
The Electric Volume of Built-in Non Fader Volume with Tone
Control
REJ03F0203-0201
Rev.2.01
Mar 31, 2008
Application
⢠This IC can be used Analog Signal processing of Power Amp. front stage
⢠This IC can be used Car Audio System, Home Audio System and TV.
Features
⢠This IC is unnecessary for outside putting CR by using SCF for Loudness and Tone Control.
Bass: +16 dB to â12 dB/2 dBstep. f0, Q = variable. f0 = 50 Hz, 80 Hz, 120 Hz Q = 1, 1.25, 1.5, 2
Mid: +12 dB to â12 dB/2 dBstep. f0, Q = variable. f0 = 700 Hz, 1 kHz, 2 kHz, 10 kHz Q = 1.5, 2
Treble: +12 dB to â12 dB/2 dBstep. f0 = variable. f0 = 8 kHz, 12 kHz
Loudness: f0 = variable. f0 = 60 Hz, 80 Hz, 100 Hz
⢠Built-in Non Fader Volume
+12 dB to â12 dB/2 dB step, ââ dB
⢠Built-in Zero-Crossing Detector Circuit for Changing Noise Measure.
⢠Built-in Differential Input and Differential Output
⢠Built-in Input Selector (4 input + Differential Input)
⢠Built-in Input Gain Control
0 dB to +18.75 dB/1.25 dB step
⢠Built-in Master Volume and Fader Volume (Front, Rear)
Volume: 0 dB to â83 dB, ââ dB/1 dB step
Fader: 0 dB, â1 dB, â2 dB, â3 dB, â4 dB, â6 dB, â8 dB, â12 dB, â16 dB, â20 dB, â30 dB, â45 dB, â60 dB,
ââ dB/16 step
⢠Serial Data Control of 2 lines formula.
Recommended Operating Conditions
Supply voltage range⦠VCC = 7 V to 9 V
VDD = 4.5 V to 5.5 V
Rated supply voltage⦠VCC = 8 V
VDD = 5 V
REJ03F0203-0201 Rev.2.01 Mar 31, 2008
Page 1 of 24
|
▷ |