M3T-SSOP36B-450 Datasheet, PDF (1/1 Pages) Renesas Technology Corp – Direct Dummy IC for 36-pin 0.8mm-pitch SSOP

_{M
3T-SSOP36B-450}
Direct Dummy IC for 36-pin 0.8mm-pitch SSOP
Function
This accessory tool connects the probe of an emulation pod and the
target, or an MCU and the target. Its dimensions are the same as
those of the MCU for the 36-pin 0.8mm-pitch SSOP (36P2R-A)
package.
It consists of parts (1) to (2) shown in the diagram below.
Attaching Procedure
This converter can be used during debugging and board-mounted
evaluation in common.
When debugging
(1) Mount a socket on the foot pattern on the target.
(2) On top of it, mount the M3T-SSOP36B-450 and a socket
frame in that order.
(3) Then connect the probe of the emulation pod, etc. to the
connector provided at the top of the M3T-SSOP36B-450.
During board-mounted evaluation
Mount an MCU and a socket frame on a socket on the
target in that order.
Dimensions




ᶃ denotes pin numbers on the M3T-SSOP36B-450.
 _{denotes pin numbers of the top of a connector.}
Symbol
A
b
D
E
e
HD
Term
Fitting height
Pin width
Package length
Package width
Interval in row of pins
Overall length
Dimensions [mm]
4.2
0.3
8.4
15.0
0.8
12.4
Foot Pattern Reference Dimensions
See Appendix D "Reference Dimensional Drawings for SSOP
Package Foot Pattern Made by Matsushita Electric Works, Ltd."
[Ordering Information] See Appendix H "Ordering Information".
* : Position of No. 1 pin
*All brand names and product names are trademarks or registered trademarks of their respective companies.