M3T-DUMMY64 Datasheet, PDF (1/1 Pages) Renesas Technology Corp – Dummy IC for 64-pin 0.8mm-pitch QFP (64P6N-A)

_M
3T-DUMMY64
Dummy IC for 64-pin 0.8mm-pitch QFP (64P6N-A)
Function
This accessory tool connects the probe of an emulation pod and the
target, or an MCU and the target. Its dimensions are the same as those
of the MCU for the 64-pin 0.8mm-pitch QFP (64P6N-A) package.
It consists of parts (1) to (3) shown in the diagram.
Dimensions
Attaching Procedure
This converter can be used during debugging and board-mounted
evaluation in common.
When debugging
(1) Mount a socket on the foot pattern on the target.
(2) On top of it, mount the M3T-DUMMY64 and a socket frame in
that order.
(3) Then connect the probe of the emulation pod to the connector
provided at the top of the M3T-DUMMY64.
During board-mounted evaluation
Mount an MCU and a socket frame on a socket on the target in that
order.
ᶃ denotes pin numbers of the M3T-DUMMY64.
 _{denotes pin numbers of the top of a connector.}
Symbol
A
b
D
E
e
HD
HE
M
Term
Fitting height
Pin width
Package length
Package width
Interval in row of pins
Overall length
Overall width
Mount pad size
Dimensions [mm]
5.0
0.3
14.0
14.0
0.8
18.0
18.0
6.3
Foot Pattern Reference Dimensions
See Appendix A "Reference Dimensional Drawing for Common
64-pin 0.8mm-pitch QFP Foot Pattern".
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.