M3T-DCT42B-450 Datasheet, PDF (1/1 Pages) Renesas Technology Corp – Direct Dummy IC for 42-pin 0.8mm-pitch SSOP

_{M
3T-DCT42B-450}
Direct Dummy IC for 42-pin 0.8mm-pitch SSOP

Function
This accessory tool connects an emulation pod and the target. It
can be mounted on the same foot pattern as the MCU housed in
the 42-pin 0.8mm-pitch SSOP (42P2R-A) package.
Attaching Procedure
This converter can be used during debugging and board-mounted
evaluation in common.
When debugging
(1) Mount this dummy IC on the foot pattern.
(2) Mount a converter (e.g. M3T-FLX-DCT503) on top of (1).
(3) Then connect the emulation pod to the connector provided on
the converter.
Also, when using an emulator MCU housed in the 42-pin
1.778mm-pitch SDIP (42P4B or 42S1B-A), use the converter
M3T-42DIP-DMS between the MCU and the M3T-DCT42B-450.
During board-mounted evaluation
Attach the converter M3T-42DIP-DMS to the dummy IC
(M3T-DCT42B-450) on the target system.
Dimensions
ᶃ denotes pin numbers on the M3T-DCT42Bʵ450.
 _{denotes pin numbers of the top of a connector.}
Symbol
A
D
E
e
Term
Fitting height
Package length
Package width
Interval in row of pins
Dimensions [mm]
5.0
11.8
17.5
0.8
Foot Pattern Reference Dimensions
See Appendix D "Reference Dimensional Drawings for SSOP
Package Foot Pattern Made by Matsushita Electric Works, Ltd."
[Ordering Information] See Appendix H "Ordering Information".
* : Position of No. 1 pin
* When using the emulation pod M37515T-RPD, the converter
M3T-FLX-DCT503 is required.
*All brand names and product names are trademarks or registered trademarks of their respective companies.