M3776AM8A Datasheet, PDF (1/3 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT MICROCOMPUTER

M3776AM8A/MCA/MFA-XXXGP
SINGLE-CHIP 16-BIT MICROCOMPUTER
REJ03B0085-0100Z
Rev.1.00
2004.02.17
1. DESCRIPTION
This microcomputer is a single-chip microcomputer that adopts a
high-performance silicon gate CMOS process, and is contained in
a 100-pin plastic mold QFP. This single-chip microcomputer is pro-
vided with an instruction queue buffer and a data buffer for
executing instructions at high speed. The central processing unit
runs in a 16-bit parallel processing mode but can be converted
into an 8-bit parallel processing mode when necessary. This prod-
uct has been designed exclusively for video equipment system
controls, incorporating a time measuring circuit for VCR servo
control, a real-time pattern generating circuit, analog amplifiers, an
OSD display circuit, and a data slicer, among its many other pe-
ripheral capabilities.
1.1 FEATURES
qNumber of basic instructions ................................................. 103
qMemory size RAM ............ M3776AM8A-XXXGP:2048bytes
M3776AMCA-XXXGP:2560bytes
M3776AMFA-XXXGP:3072bytes
ROM ............. M3776AM8A-XXXGP:64kbytes
M3776AMCA-XXXGP:96kbytes
M3776AMFA-XXXGP:120kbytes
qInstruction execution time
(fastest instruction, 16 MHz high-speed mode) ................ 250 ns
(fastest instruction, 12 MHz double-speed mode)
........................................................................................... 167 ns
qSingle power source
In 16 MHz high-speed mode
(OSD/data slicer off) ............................................... 4.0 V to 5.5 V
(OSD/data slicer on) ........................................... 4.75 V to 5.25 V
In 12 MHz double-speed mode
(OSD/data slicer off) .............................................. 4.0 V to 5.5 V
(OSD/data slicer on) ........................................... 4.75 V to 5.25 V
In 32 kHz low-speed mode
(OSD/data slicer off) ............................................... 2.6 V to 5.5 V
qOSD power source ............................................. 4.75 V to 5.25 V
qInterrupt ......................................................... 23 factors, 6 levels
q16-bit timer .................................................................................. 3
q8-bit timer .................................................................................... 3
qClock-synchronous serial I/O ..................................................... 2
(one of which can perform automatic 64-byte transfers)
qI²C-Bus interface (single master) ............................................... 1
q8-bit A-D converter...........1 unit (11 channel inputs)
q8-bit D-A converter ...................................................................... 2
q12/14-bit PWM ............................................................................ 2
q14-bit PWM ................................................................................. 1
qTime measurement circuit (TMT)
One counter for measuring time to generate input signals
DRFG, CPFG, CPPG, VSYNG, and GEN
One counter for measuring time to generate input signals RLS
and RLT
qRemote-control noise filter (majority of 4 samplings)
qReal-time pattern (RTP) generation circuit
Outputs real-time pattern to exterior, RECCTL signal to CTL
head control circuit, trigger for start the A-D converter, trigger for
starting OSD vertical display
qAmplification circuits
CTL head control circuit, CTL amplifier, CTL schmidt circuit,
drum PG circuit, drum FG circuit, capstan FG circuit, capstan
FG amplifier circuit
qPulse duty detection circuit (VISS and VASS signal detection
features embedded) Measures PBCTL signal duty ratio.
qSynchronous signal separation circuit
qEOR output feature (HASW, CROT) .......................... 2-bit output
qWatchdog timer
qProgrammable I/O ports ........................................................... 69
(Ports P00–P06, P10, P11, P15–P17, P2, P4– P7, P84–P87, P9,
P10, P110, P111)
qInput ports ................................................................................. 10
(Ports P07, P12–P14, P30,P31,P80–P83)
q4 Embedded clock-generating circuits
Built-in feed-back resistor between XIN–XOUT
Built-in feed-back resistor between XCIN–XCOUT
qCPU double-speed enable (f(XIN) max. 12.0 MHz)
qROM correction function included
qOSD function
Display characters ................................ 32 characters ✕ 16 lines
Kinds of characters ...................... Composite Output 254 kinds
RGB Output 285 kinds
Kinds of character sizes .................................................... 8 kinds
Output method ........ Composite video signal, RGB output (PAL,
MPAL, NTSC, NPAL)
Special function ...................... Display with background shadow
(button display)
On-chip sync correct circuit (AFC)
qData slicer
On-chip slicer for XDS
1.2 APPLICATION
VCR, TVCR
Rev.1.00 2004.02.17 page 1 of 2