English
Language : 

M16C29_07 Datasheet, PDF (1/17 Pages) Renesas Technology Corp – Standard Characteristics
M16C/29 Group Standard Characteristics
M30290FxHP(x=A,C),M30291FxHP(x=A,C),
M30290FxTHP(x=A,C),M30291FxTHP(x=A,C),
M30290FxVHP(x=A,C),M30291FxVHP(x=A,C)
Standard Characteristics Example
Standard characteristics described below are just examples of the M16C/29 group(M16C/29,M16C/29T,M16C/29V) characteristics and are not guaranteed.
For rated values, refer to "M16C/29 Group Hardware manual".
(1) Power Supply Current Standard Characteristics Example (Vcc-Icc)
f(Xin)=20MHz (Pluse generator, Ta = 25°C, output transistor is in the cut-off state.*)
20
19
18
No Division
17
16
15
14
13
Division by 2
12
11
10
Division by 4
9
8
Division by 8
7
Division by 16
6
5
4
3
2
1
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
Power Source Voltage Vcc [V]
Fig. 1. Vcc-Icc(at Nomal Operation Mode)
Clock source
f(Xin) = Pulse Generator
Square wave
Xout:Open
Division setting
Main Timer
Serial
AD con
Clock A, B Timer S I/O
MMIIC -version
1/1 f1 f1 f1sio (fiic/2)/31 fad/ 1
1/2 f2 f2 f2sio (fiic/2)/31 fad/ 2
1/4 f8 f2/4 f8sio (fiic/4)/31 fad/12
1/8 f8 f2/16 f8sio (fiic/8)/31 fad/12
1/16 f32 f2/16 f32sio (fiic/8)/31 fad/12
* Timer pulse and serial data is output
* SDAMM & SCLMM are pull-up.
No division operation(Pluse generator, Ta = 25 °C, output transistor is in the cut-off state.*)
20
19
18
f(Xin)=20MHz
17
16
15
f(Xin)=16MHz
14
13
12
11
10
9
f(Xin)=8MHz
8
7
6
f(Xin)=4MHz
5
4
3
2
1
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
Power Source Voltage Vcc [V]
Fig. 2. Vcc-Icc(at Nomal Operation Mode)
Clock source
f(Xin) = Pulse Generator
Square wave
Xout:Open
Division setting
Main Timer
Serial
AD con
Clock A, B Timer S I/O
MMIIC -version
1/1 f1 f1 f1sio (fiic/2)/31 fad/ 1
* Timer pulse and serial data is output
* SDAMM & SCLMM are pull-up.
At WIT instruction executed (Pluse generator, Ta = 25 °C, output transistor is in the cut-off state.)
A/D conversion not executed
2.0
1.5
f(Xin)=20MHz
1.0
f(Xin)=16MHz
Clock source
f(Xin) = Pulse Generator
Square wave
Xout:Open
Stop peripheral function clock.
Xin-Xout drive capacity : High
0.5
f(Xin)=8MHz
f(Xin)=4MHz
0.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
Power Source Voltage Vcc [V]
Fig. 3. Vcc-Icc (at WIT instruction executed)
REJ99B1342-0100
©2007. Renesas Technology Corp., All rights reserved.
2007.06
Page 1 of 17