HD74HC93 Datasheet, PDF (1/8 Pages) Hitachi Semiconductor – 4-bit Binary Counter

HD74HC93
4-bit Binary Counter
REJ03D0557-0200
(Previous ADE-205-430)
Rev.2.00
Oct 06, 2005
Description
The HD74HC93 is a 4-bit ripple type counter consisting of four master/slave flip-flops that are internally connected to
provide separate divide-by-two and divide-by-eight sections. Each section has a separate clock input which initiates
state changes of the counter on the high-to-low clock transition. State changes of the Q outputs do not occur
simultaneously because of internal ripple delays. Therefore, decoded output signals are subject to decoding spikes and
should not be used as clocks or as strobes except when gated with the clock of the HD74HC93. Q_A is the output of the
divide-by-two section; Q_B, Q_C, and Q_D are the binary outputs of the divide-by-eight section.
A gated AND asynchronous reset is provided which resets all the flip-flops.
Because the output from the divide-by-two section is not internally connected to the succeeding stages, the devices may
be operated in various counting modes:
1. A 4-bit ripple counter – The Q_A output must be externally connected to the clock B input. The input count pulses
are applied to the clock A input. Simultaneous divisions of 2, 4, 8 and 16 are performed at the Q_A, Q_B, Q_C and Q_D
outputs.
2. A 3-bit ripple counter – The input count pulses are applied to the clock B input. Simultaneous frequency divisions
of 2, 4 and 8 are available at the Q_B, Q_C and Q_D outputs. Independent use of the first flip-flop is available if the reset
function coincides with reset of the 3-bit ripple-through counter.
Features
• High Speed Operation: t_pd (A to Q_A) = 13 ns typ (C_L = 50 pF)
• High Output Current: Fanout of 10 LSTTL Loads
• Wide Operating Voltage: V_CC = 2 to 6 V
• Low Input Current: 1 µA max
• Low Quiescent Supply Current: I_CC (static) = 4 µA max (Ta = 25°C)
• Ordering Information
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
HD74HC93P
DILP-14 pin
PRDP0014AB-B
(DP-14AV)
P
HD74HC93FPEL SOP-14 pin (JEITA)
PRSP0014DF-B _FP
(FP-14DAV)
HD74HC93RPEL SOP-14 pin (JEDEC) ^PRSP0014DE-A RP
(FP-14DNV)
Note: Please consult the sales office for the above package availability.
Taping Abbreviation
(Quantity)
—
EL (2,000 pcs/reel)
EL (2,500 pcs/reel)
Function Table
Reset/Count Function Table
Reset Inputs
Outputs
R0(1)
R0(2)
QD
QC
QB
QA
H
H
L
L
L
L
L
X
Count
X
L
Count
Rev.2.00, Oct 06, 2005 page 1 of 7