|
38D5 Datasheet, PDF (1/141 Pages) Renesas Technology Corp – SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER | |||
|
38D5 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
REJ03B0158-0301
Rev.3.01
Aug 08, 2007
DESCRIPTION
The 38D5 Group is the 8-bit microcomputer based on the 740
Family core technology.
The 38D5 Group is pin-compatible with the 38C5 Group.
The 38D5 Group has an LCD drive control circuit, an A/D
converter, a serial interface, and a ROM correction function as
additional functions.
The QzROM version and the flash memory version are available.
The flash memory version does not have a selection function for
the oscillation start mode. Only the on-chip oscillator starts
oscillating.
The various microcomputers include variations of memory size,
and packaging. For details, refer to the section on part
numbering.
FEATURES
⢠Basic machine-language instructions ................................. 71
⢠The minimum instruction execution time ................... 0.32 µs
(at 12.5 MHz oscillation frequency)
⢠Memory size (QzROM version)
ROM ........................................................ 32 K to 60 K bytes
RAM ......................................................... 1536 to 2048 bytes
⢠Memory size (Flash memory version)
ROM ...................................................................... 60 K bytes
RAM ...................................................................... 2048 bytes
⢠Programmable input/output ports .. 59 (common to SEG: 36)
⢠Interrupts ............................................. 17 sources, 16 vectors
(Key input interrupt included)
⢠Timers ..................................................... 8-bit à 4, 16-bit à 2
⢠Serial interface
Serial I/O1 ...............8-bit à 1 (UART or Clock-synchronized)
Serial I/O2 .............................. 8-bit à 1 (Clock-synchronized)
⢠PWM .......... 10-bit à 2, 16-bit à 1 (common to IGBT output)
⢠A/D converter .......................................... 10-bit à 8 channels
(A/D converter can be operated in low-speed mode.)
⢠Watchdog timer ......................................................... 8-bit à 1
⢠ROM correction function ....................... 32 bytes à 2 vectors
⢠LED direct drive port ............................................................ 6
(average current: 15 mA, peak current: 30 mA, total current: 90 mA)
⢠LCD drive control circuit
Bias ............................................................................ 1/2, 1/3
Duty ............................................................... Static, 2, 3, 4, 8
Common output ................................................................. 4/8
Segment output .............................................................. 32/36
⢠Main clock generating circuit ............................................... 1
(connect to external ceramic resonator or on-chip oscillator)
⢠Sub-clock generating circuit ..................................................1
(connect to external quartz-crystal oscillator)
⢠Power source voltage (QzROM version)
[In frequency/2 mode]
f(XIN) ⤠12.5 MHz.............................................. 4.5 to 5.5 V
f(XIN) ⤠8 MHz................................................... 4.0 to 5.5 V
f(XIN) ⤠4 MHz................................................... 2.0 to 5.5 V
f(XIN) ⤠2 MHz................................................... 1.8 to 5.5 V
[In frequency/4 mode]
f(XIN) ⤠16 MHz................................................. 4.5 to 5.5 V
f(XIN) ⤠8 MHz................................................... 2.0 to 5.5 V
f(XIN) ⤠4 MHz................................................... 1.8 to 5.5 V
[In frequency/8 mode]
f(XIN) ⤠16 MHz................................................. 4.5 to 5.5 V
f(XIN) ⤠8 MHz................................................... 2.0 to 5.5 V
f(XIN) ⤠4 MHz................................................... 1.8 to 5.5 V
[In low-speed mode].............................................. 1.8 to 5.5 V
Note. 12.5 MHz < f(XIN) ⤠16 MHz is not available in the fre-
quency/2 mode.
⢠Power source voltage (Flash memory version)
[In frequency/2 mode]
f(XIN) ⤠12.5 MHz.............................................. 4.5 to 5.5 V
f(XIN) ⤠8 MHz................................................... 4.0 to 5.5 V
f(XIN) ⤠4 MHz................................................... 2.7 to 5.5 V
[In frequency/4 mode]
f(XIN) ⤠16 MHz................................................. 4.5 to 5.5 V
f(XIN) ⤠8 MHz................................................... 2.7 to 5.5 V
[In frequency/8 mode]
f(XIN) ⤠16 MHz................................................. 4.5 to 5.5 V
f(XIN) ⤠8 MHz................................................... 2.7 to 5.5 V
[In low-speed mode].............................................. 2.7 to 5.5 V
Note. 12.5 MHz < f(XIN) ⤠16 MHz is not available in the fre-
quency/2 mode.
⢠Power dissipation (QzROM version)
⢠In frequency/2 mode ..................................... Typ. 32 mW
(VCC = 5 V, f(XIN) = 12.5 MHz, Ta = 25°C)
⢠In low-speed mode ........................................ Typ. 18 µW
(VCC = 2.5 V, f(XIN) = stop, f(XCIN) = 32 kHz, Ta = 25°C)
⢠Power dissipation (Flash memory version)
⢠In frequency/2 mode ..................................... Typ. 20 mW
(VCC = 5 V, f(XIN) = 12.5 MHz, Ta = 25°C)
⢠In low-speed mode ...................................... Typ. 1.1 mW
(VCC = 2.7 V, f(XIN) = stop, f(XCIN) = 32 kHz, Ta = 25°C)
⢠Operating temperature range ............................... â20 to 85°C
Flash Memory Mode
⢠Program/Erase voltage ............................. VCC = 2.7 to 5.5 V
⢠Program method ....................... Programming in unit of byte
⢠Erase method .................................................... Block erasing
⢠Program/Erase control by software command
APPLICATION
Household products, Consumer electronics, etc.
Rev.3.01 Aug 08, 2007 Page 1 of 134
REJ03B0158-0301
|
▷ |