3803H Datasheet, PDF (1/11 Pages) Renesas Technology Corp – (QzROM version) Standard Characteristics

3803H Group (QzROM version) Standard Characteristics
M38039G4H-XXXHP/KP,M38039G6H-XXXHP/KP,M38039G8H-XXXHP/KP,M38039GCH-XXXHP/KP/WG
M38039G4HSP/HP/KP,M38039G6HSP/HP/KP,M38039G8HSP/HP/KP,M38039GCHSP/HP/KP/WG
Standard Characteristics Example
Standard characteristics described below are just examples of the 3803H Group(QzROM version)'s characteristics and are not guaranteed.
For rated values, refer to "3803 Group (Spec.H QzROM version) Datasheet".
(1) Power Supply Current Standard Characteristics Example (Vcc-Icc)
When system is operating in high-speed mode (ceramic oscillation, Ta = 25 °C,
output transistor is in the cut-off state)
QZROM version (A/D conversion not executed)
10.0
f(XIN)=16MHz
9.0
f(XIN)=12MHz
f(XIN)=8MHz
f(XIN)=4MHz
8.0
f(XIN)=2MHz
When system is operating in middle-speed mode (ceramic oscillation, Ta = 25 °C
output transistor is in the cut-off state)
QZROM version (A/D conversion not executed)
5.0
f(XIN)=16MHz
4.5
f(XIN)=12MHz
f(XIN)=8MHz
4.0
f(XIN)=6MHz
7.0
3.5
6.0
3.0
5.0
2.5
4.0
2.0
3.0
1.5
2.0
1.0
1.0
0.5
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.1. Vcc-Icc (QZROM version, high-speed mode)
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.2. Vcc-Icc (QZROM version, middle-speed mode)
When system is operating in low-speed mode (crystal oscillation, Ta = 25 °C,
f(XCIN)=32.768KHz, output transistor is in the cut-off state)
QZROM version (A/D conversion not executed)
1
At STP instruction executed (Ta = 25 °C, output transistor is in the cut-off state)
QZROM version
2.0
0.8
1.5
0.6
Ta=-20°
1.0
Ta=25°C
0.4
Ta=85°
0.5
0.2
0
1.5
2
2.5
3
3.5
4
4.5
5
5.5
Power Source Voltage Vcc [V]
Fig3. Vcc-Icc (QZROM version, low-speed mode)
At 16 MHz high-speed mode, increment at A/D conversion executed (ceramic
oscillation, Ta = 25 °C, output transistor is in the cut-off state)
QZROM version
11.0
10.0
A/D conversion executed
A/D conversion not executed
9.0
8.0
7.0
6.0
5.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.5. Vcc-Icc (QZROM version, increment at A/D conversion executed)
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig. 4. Vcc-Icc (QZROM version, at STP instruction executed)
At WIT instruction executed (ceramic oscillation, Ta = 25 °C,f(XIN)=16MHz, output
transistor is in the cut-off state)
QZROM version
3.5
3.0
high-speed mode
middle-speed mode
2.5
2.0
1.5
1.0
0.5
0.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
Power Source Voltage Vcc [V]
Fig.6. Vcc-Icc (QZROM version, at WIT instruction executed in middle-speed mode )
REJ99B1150-0100
©2006. Renesas Technology Corp., All rights reserved.
November 2006
Page 1 of 9