VT-IPM2M-113-D Datasheet, PDF (1/2 Pages) Red Lion Controls. Inc – Industrial RTU

VersaTRAK^® IPm2m^™
Sixnet Automation Devices
VersaInTdRuAsKtri^®aIlPRmTU2m^TM
PRODUCT DATASHEET
VT-IPM2M
PRODUCT HIGHLIGHTS
 Datalogging and timestamping, trending, alarm logging, and
sequence of events
 Stand alone control of remote sites IEC 61131 ISaGRAF and
high level C++ programming
 Limitless multi-user connectivity; telephone, Internet, and
wireless telemetry, 10/100 Ethernet plus up to 2 com ports
 Advanced communication capabilities report on exception,
store & forward, peer to peer
 True open system design, Ethernet TCP, Modbus, Linux,
OPC & more
 Small to large applications, scalable from 1 to 1,000+
stations
 Embedded Linux open source software, add applications,
I/O drivers & much more
 An OEM’s dream platform, pre-certied, add your application
DISCRETE OUTPUTS
 4 channels (10-30 VDC)
 Maximum output per channel 1 Amp
 Maximum output per module 4 Amps
 Max. OFF state leakage 0.05 mA
 Minimum load 1 mA
 Inrush current 5 Amps (100 mS surge)
PERFORMANCE SPECIFICATIONS
 Industrial powerPC (32 bit data bus)
 Typical ON resistance 0.3 Ohms
 Typical ON voltage (@1A) 0.3 VDC
 Operating system embedded Linux
 Dynamic memory (RAM) 32 Mbytes - 32bit, 0 wait states
 Program memory (Flash) 32 Mbytes
 Retained memory (RAM) 512K (battery-backed)
 Local I/O (on-board) 26 (see ordering info.)
 Limit placed on expansion 256 per I/O type
 Datalogging support
 IEC 61131 programming
 High Level C programming, Linux open source
ANALOG INPUTS
8 channels (4-20 mA)
A/D resolution 16 bits (0.003%)
Full scale accuracy +/-0.1% (@20°C)
Span and offset temp. coef. +/-50 ppm per °C
Input impedance 100 Ohm
Current protection Self-resetting fuses
DMRR (differential mode rejection) 66 dB at 50/60 Hz
ETHERNET PORT
 10/100BaseTx (auto-detecting)
 RJ45 connection (auto-crossover)
 Protocols TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP,
SIXNET, and more
ANALOG OUTPUTS
up to 2 channels (4-20 mA)
D/A resolution 16 bits (less than 1μA)
Full scale accuracy (@20°C) +/- 0.02%
Span and offset temp. coef. +/- 50 ppm per °C typical
Max. output settling time 5 mS (to .05%)
SERIAL PORT
Load resistance range (@ +24 VDC supply) 0-750 Ohms
 RS485 port A screws (485+, 485-, GND) (2-wire half-duplex)
Short circuit protection current limiting
 RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR,DSR, GND)
 Protocols (master & slave) SIXNET & Modbus RTU/ASCII;
many others available in Linux
ENVIRONMENTAL
 DIN rail or at panel mount
 Flow control hardware, software, RTS-party (for radios and RS485)
 Input power 10-30 VDC
 Input current 100 mA @ 24 VDC (typical)
DISCRETE INPUTS
 Temperature -40 to 70°C (-40 to 85°C storage)
 12 channels (sinking or sourcing)
 Humidity 5% to 95% RH (non-condensing)
 Guaranteed ON voltage 9 VDC
 Flammability UL 94V-0 materials
 Maximum voltage 30 VDC
 Electrical safety UL 508, CSA C22.2/14; EN610101; (IEC1010)
 Guaranteed OFF voltage & current 5.0 VDC & 1.5 mA DC
 EMI emissions FCC part 15, ICES-003, Class A; EN55022;
 Input resistance 10K Ohms
EN61326-1
 Input current @ 24 VDC 3 mA
 EMC immunity EN61326-1 (EN61000-4-2,3,4,6)
 Filtered ON/OFF delay 25 mS (20 Hz max. counting)
 Vibration IEC68-2-6
 Fast ON/OFF delay 4 mS (100 Hz max. counting)
 Hazardous locations (Class 1, Div 2, Groups A,B,C,D) UL
 Count rate (channels 1 - 8) see above (10 KHz on channel 1)
1604, CSA C22.2/213, Cenelec EN50021 Zone 2
All specications are subject to change. Consult factory for latest info.
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
WWW.SIXNET.COM