TSC11001 Datasheet, PDF (1/8 Pages) Red Lion Controls. Inc – MODEL TSC - TEMPERATURE SETPOINT CONTROLLER

Bulletin No. TSC-C
Drawing No. LP0326
Released 08/13
Tel [phone]
Fax [phone]
www.redlion.net
MODEL TSC - TEMPERATURE SETPOINT CONTROLLER
 AUTOMATIC PROGRAM DELAY FOR PROFILE CONFORMITY,
PLUS PROGRAM LINKING, REPEATING AND AUTO POWER-ON
FUNCTIONS FOR ENHANCED CAPABILITY
 DUAL EVENT OUTPUTS FOR TIMED ACTIVATION OF PROCESS
EQUIPMENT SUCH AS STIRRERS, FANS, HEATERS, ETC. (Uses
Alarm Output Channels)
 FOUR SETPOINT & PID PARAMETER SETS FOR QUICK RECALL
OF SETPOINTS AND/OR GAIN VALUES DURING BATCH OR
PROCESS CHANGEOVER
 PROGRAMMABLE USER INPUT FOR CONTROLLER AND
SETPOINT PROGRAM CONTROL
 100 MSEC SAMPLING PERIOD WITH 0.15% ACCURACY
 ON DEMAND AUTO-TUNING OF PID CONTROL SETTINGS
C UR L US LISTED
IND. CONT. EQ.
51EB
 SETPOINT PROGRAM CONTROLLER FOR TIME VS.
TEMPERATURE (RAMP/SOAK) AND SPECIAL BATCH/RECIPE
APPLICATIONS
 ADVANCED PROGRAM PROFILING IN A 1/8 DIN PACKAGE
 ON-LINE MONITORING AND CONTROL OF PROGRAM STATUS,
TIME, AND SETPOINT VALUE (Program Run, Pause, Stop,
Advance, Modify Time, & Setpoint Value)
 DUAL LED DISPLAYS FOR SIMULTANEOUS INDICATION OF
TEMPERATURE AND SETPOINT OR TEMPERATURE AND
PROFILE STATUS
 ACCEPTS ANY ONE OF 10 DIFFERENT TYPES OF SENSOR
INPUTS (Thermocouple or RTD)
 FIELD REPLACEABLE AND INTERCHANGEABLE OUTPUT
MODULES (Relay, Logic/SSR drive, and Triac)
 OPTIONAL DUAL ALARM OUTPUTS (Uses Output Modules)
 OPTIONAL COOLING OUTPUT (Uses Output Module)
 OPTIONAL LINEAR 4 to 20 mA or 0 to 10 VDC OUTPUT FOR
CONTROL OR TEMPERATURE RE-TRANSMISSION
 OPTIONAL RS485 SERIAL COMMUNICATIONS INTERFACE
 OPTIONAL TYPE 4X/IP65 SEALED FRONT BEZEL
DESCRIPTION
The TSC is a setpoint controller suitable for time vs. temperature, process
control applications. The TSC accepts signals from a variety of temperature
sensors (thermocouple and RTD elements), precisely displays the process
temperature, and provides an accurate output control signal (time proportional
or linear) to maintain a process at the desired control point. A comprehensive set
of easy to use steps allows the controller to satisfy various applications. The user
input can be programmed to perform a variety of controller functions.
Dual 4-digit displays allow viewing of the measured temperature value and
setpoint or temperature and profile status simultaneously. Front panel indicators
inform the operator of controller status and output states. Replaceable output
modules (Relay, logic/SSR drive or Triac) can be fitted to the main control output,
alarm output(s) or timed event output(s), and cooling output.
The TSC has been designed to simplify the set-up and operation of a controlled
setpoint profile program. The setpoint program is easily entered and controlled
through the front panel. Full display capabilities keep the operator informed of the
process temperature, profile status, output states, and setpoint value.
The controller can operate in the standard PID control mode for both heating
or cooling with on-demand auto-tune which establishes the PID gain set. The
PID gain set can be fine tuned by the operator at any time or may be locked from
further modification. The unit can be transferred to the manual control mode
providing the operator with direct control of the output.
The TSC features four programs or profile recipes, each with up to eight
ramp/soak segments, which can be easily stored and executed at any time.
Longer profiles can be achieved by linking one or more profiles together,
creating a single profile of up to 32 ramp/soak segments. Temperature profile
conformity is assured during either soak (hold) phases or both ramp and hold
phases by an adjustable error band parameter. The program repeat function
cycles the profile either continuously or a set number of times. Power-on options
automatically re-start, stop, or resume a running profile. The profile can be
controlled via the front panel buttons, the user input, or the optional serial
communications port.
Four control points, each having a setpoint and PID parameter set, are
available for instant front panel implementation during batch changeover, or
DIMENSIONS
In inches (mm)
Note: Recommended minimum clearance (behind the panel) for mounting clip installation is 5.5" (140) H x 2.1" (53.4) W.
5.41
(137.4)
PANEL CUT-OUT
%PW MAN AL1
PGM OP1 AL2
DSP
PAR
3.80
(96.5)
3.60
(91.4)
1.77
+.02
-.00
(45
) ^+.6
-.0
3.62
+.03
-.00
(92
+.8
-.0
)
1.95
(49.5)
.40
(10.2)
5.29
(134.4)
1
1.75
(44.4)