ANT-DB1-RAF-RPSMA Datasheet, PDF (1/2 Pages) Red Lion Controls. Inc – Compact Dual-Band 1/2 Wave Antenna

ANT-DB1-RAF-RPSMA Antenna
ANT-DB1-RAF-RPSMA ^{N-Tron Networking Series}
THE IND^CU^oST^mRI^pAL^aN^cE^tTW^DO^uR^aK ^lC^-O^BM^aPAⁿN^dY ^{1/2 Wave Antenna}
The ANT-DB1-RAF-RPSMA is a compact, dual-band, 1/2 wave
antenna covering the 2.45 and 5.8GHz bands. The antenna
features a tilt and swivel joint which allows it to be oriented at
straight or right angles to the product or folded for storage and
shipment. It attaches to the 702-W via an RP-SMA connector
702-W APPLICATIONS
• Wireless LAN applications
• Client antennas
• 802.11b/g/n applications
SPECIFICATIONS
Frequencies:
Band 1: 2.4Ghz
Band 2: 5.8GHz
Gain @ 2.4GHz
2dBi
Gain @ 5.8GHz
4dBi
VSWR:
<2
Impedance:
50 ohms
Dimensions (Length x Diameter ): 4.13" x 0.43"
104.9mm x 11mm
Range Estimates - 2.4GHz
Throughput
26Mbps
Distance (Miles)
1.35
Distance (kilometers)
2.18
Tx Power
22dBm
Receive Sensitivity
-91dBm
Number of Spacial Streams
2
Range Estimates - 5.8GHz
Throughput
26Mbps
Distance (Miles)
0.81
Distance (kilometers)
1.30
Tx Power
22dBm
Receive Sensitivity
-90dBm
Number of Spacial Streams
2
100Mbps
0.12
.19
15dBm
-77dBm
2
100Mbps
0.07
.12
15dBm
-76dBm
2
*Given the following parameters:
• Free Space loss / 2-ray ground reflection models
• Antenna is mounted directly nto an N-TRON 702-W
Ethernet Radio mounted twenty-five (25) feet above
ground level.
• Clear line of sight between radios with no obstructions
of the first Fresnel Zone
• 20MHz wide signal
• Center frequency = 2.452GHz or 5.805GHz
• 10dB loss assumed for weather conditions
Range estimates are theoretical. Actual results may vary based on installation
conditions. A site survey should be performed as part of the planning process
to determine the presence of RF interference and identify optimum installation
locations for access points and antennas.
REV 100419
®2010 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Specifications subject to change without notice. The responsibility for the use and
application of N-TRON products rests with the end user. N-TRON makes no warranties as to the fitness or suitability of any N-TRON product for any specific application. N-TRON
Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product.