716M12 Datasheet, PDF (1/3 Pages) Red Lion Controls. Inc – Fully Managed Industrial Ethernet Switch

7^IN1^DU6^STM^RIA1^{L E}2^THI^En^RNd^ETu^Ss^ERt^Ir^ESial Ethernet Switch
N-Tron Networking Series
Fully Managed Industrial Ethernet Switch
The N-TRON® 716M12 Industrial Ethernet Switch offers outstanding
performance and ease of use. With 16 10/100BaseTX M12 D-coded
ports, the fully managed switch is ideally suited for connec�ng Ethernet
enabled devices in railway, industrial and security applica�ons. It is
designed to meet or exceed the opera�ng parameters of the connected
equipment. These include extended temperature ra�ngs, extended shock
and vibra�ons specs, redundant power inputs, and high MTBF (greater
than 2 million hours). The switch features a rugged IP67-rated enclosure
for resistance to dust and wash immersion.
PRODUCT FEATURES
• IP67-rated hardened metal enclosure
• Bulkhead mountable (op�onal DIN-rail moun�ng)
• Dustproof
• Protec�on against low/high pressure water jets
• Temporary immersion in water
• Sixteen 10/100BaseTX M12 D-Coded ports
• -40° C to 85°C opera�ng temperature
• ESD and surge protec�on diodes on all ports
• Auto Sensing 10/100BaseTX, Duplex, and MDIX
• Store-and-Forward Technology
• Redundant power inputs (10-49 VDC)
FULLY MANAGED FEATURES
• Full SNMP v1, v2, v3 and web browser management
• Detailed ring map and fault loca�on char�ng
• N-Ring™ Technology with ~30ms healing
• N-Link™ redundant N-Ring coupling
• 802.1d, 802.1w, 802.1D RSTP
• N-View™ OPC Monitoring
• Plug-and-Play IGMP support
• 802.1Q tag VLAN and Port VLAN
• 802.1p QoS, Port QoS, DSCP
• EtherNet/IP™ CIP Messaging
• LLDP (Link Layer Discovery Protocol)
• Trunking
• Port mirroring
• DHCP Server, Op�on 82 relay, Op�on 61, IP Fallback
• Port Security—MAC address based
• Op�onal N-Tron auto congura�on device for saving and
restoring congura�on. (P/N 700-NTCD-M12)
ͳͭͲMͭͮ
N-Tron Ethernet Series
Fully Managed Industrial Switch
REMOTE MONITORING
N-Tron provides mul�ple tools to monitor 716M12 switch ac�vi�es.
A convenient web-based interface is available to view and congure
switch op�ons, as well as to monitor network traffic, alarms, and trend
informa�on. For �ghtly controlled environments, N-View OPC server
so�ware easily combines with HMI control and monitoring applica�ons
to form a complete surveillance solu�on for N-View-enabled switches.
For local monitoring, each switch features congurable LEDs to indicate
power failure and N-Ring status.
N-RING TECHNOLOGY
Advanced N-Ring technology provides expanded capacity, detailed fault
diagnos�cs and fast ~30ms healing �mes in rings composed of N-Tron fully
managed switches. The integrity of the N-Ring is con�nually monitored for
error condi�ons. If a fault is detected, the ring converts to a daisy chain
topology and restores communica�ons within ~30ms. For convenience,
users can easily access a detailed ring map and fault loca�on chart through
the ring manager's browser or the OPC server. Each N-Ring accommodates
up to 250 fully-managed N-Tron switches. N-Link easily connects mul�ple
rings, crea�ng addi�onal pathways to cri�cal applica�ons and increasing
overall network resiliency.
INDUSTRIAL SPECIFICATIONS
Standard industrial product features include high MTBF, extended shock
and vibra�on specica�ons, redundant power inputs and a wide opera�ng
temperature range.
EASE OF USE
N-Tron's auto sensing capabilities allow all 10/100BaseTX ports to
automa�cally nego�ate maximum speed and performance. If preferred,
ports can be hardcoded using the user interface. A high-speed processor
enables simultaneous wire speed capability on all 100BaseTX ports.
www.n-tron.com