English
Language : 

105FX-POE Datasheet, PDF (1/3 Pages) Red Lion Controls. Inc – Unmanaged Industrial Ethernet Switch
105FX-POE Industrial Ethernet Switch
N-Tron Networking Series
THE INDUUnSmTRaIAnLaNgETeWdOIRnKdCuOsMtPrAiaNYl Ethernet Switch
The N-Tron ® 105FX-POE Unmanaged Industrial Ethernet
Switch is designed to transmit power along with data over
an Ethernet network. It is ideal for PoE capable devices
where running an AC power feed is either not possible or cost
effective. This allows an end user to power a PoE camera,
wireless access point, or any other PoE capable device without
the need for running separate wires for power. This also
makes it possible to utilize a centralized battery backup for
all these devices.
PRODUCT FEATURES
• Compact, Space Saving Package
• Full IEEE 802.3 and 802.3af Compliance
• American Bureau of Shipping (ABS) Type Approval
• Certified for Rail Applications
• Four 10/100BaseTX RJ-45 Ports (4 Mode A PoE Ports)
• One 100BaseFX Port with ST or SC Connectors
• Unmanaged Operation
• Extended Environmental Specifications
•-40ºC to 85º Operating Temperature
• Automatic Detection of Connected PoE Devices
• Support for Full/Half Duplex Operation
• Auto-sensing Duplex, Speed, and MDIX (RJ-45)
• Up to 1.0 Gb/s Maximum Throughput
• Full Wire Speed Communications
• Supports 15.4 Watts per port
(13 Watts at the PD)
• Redundant Power Inputs (46-49 VDC)
• Power Fault Status LED's
• LED Link/Activity Status Indication
• LED PoE Status Indication
• Hardened Metal DIN-Rail Enclosure
PRODUCT OVERVIEW
The 105FX-POE Industrial Network Switch is designed
to meet the most demanding industrial communications
requirements by providing high throughput and minimum
downtime while also providing power to PoE capable devices
over the Ethernet network.
The 105FX-POE provides four RJ-45 auto
sensing10/100BaseTX ports. All ports are full/half
duplex capable, using "state of the art" Ethernet switching
technology. All four RJ-45 ports also act as PoE ports
allowing power to pass through four of the eight strands
of CAT5 cable. Each PoE port supports up to 15.4 watts
of power. The 5th port is a 100BaseFX fiber optic uplink
utilizing industry standard ST or SC duplex connectors.
The 105FX-POE auto-negotiates the speed and flow control
capabilities of the four TX port connections, and configures
itself automatically.
The N-Tron 105FX-POE also supports up to 2,000 MAC
addresses, enabling these products to support extremely
sophisticated and complex network architectures.
The 105FX-POE automatically detects any PoE device that is
connected and powers it accordingly. If a PoE fault is detected
on a specific port the Auto-disconnect feature disables PoE
power on that port, allowing only data communications to
pass, reducing the risk of damaging costly equipment.
The 105FX-POE is an ideal candidate for providing data
and power to wireless LAN access points, network cameras,
VoIP, and other PoE capable devices. The product also helps
reduce costs by eliminating the need for electrical wiring and
electrician expenses.
The 105FX-POE has extended operating environmental
specifications to meet the harsh needs of the industrial
environment. For cost savings and convenience the network
switch can be DIN-Rail mounted alongside Ethernet I/O or
other Industrial Equipment.
To increase reliability the 105FX-POE provides dual
redundant power inputs. Two power LED's are also
provided on this unit indicating a valid power source on both
the redundant power inputs and also indicating when a power
fault bus occurs.