TFMBG150A Datasheet, PDF (1/3 Pages) Rectron Semiconductor – SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR (600 WATT PEAK POWER 1.0 WATT STEADY STATE)

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT
GPP TRANSIENT VOLTAGE SUPPRESSOR
600 WATT PEAK POWER 1.0 WATT STEADY STATE
FEATURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 600 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
TVS
TFMBG150A
DO-214AA
GULL WING
Ratings at 25 ^oC ambient temperature unless otherwise specified.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
TFMBG150A
Electrical characteristics
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
SYMBOL
Peak Power Dissipation with a 10/1000uS (Note 1,2, Fig.1)
PPPM
Peak Pulse Current with a 10/1000uS waveform ( Note 1, Fig.3 )
IPPM
Peak Forward Surge Current 8.3mS single half sine-wave
superimposed on rated load (JEDEC method) (Note 2,3)
IFSM
unidirectional only
Maximum Instantaneous Forward Voltage at 50A for unidirectional
VF
only
Operating and Storage Temperature Range
TJ, TSTG
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25^oC per Fig.2.
2. Mounted on 0.2 X 0.2”( 5.0 X 5.0mm ) copper pad to each terminal.
3. Measured on 8.3mS single half sine-wave duty cycle = 4 pules per minute maximum.
VALUE
Minimum 600
SEE TABLE 1
100
5.0
-55 to + 150
UNITS
Watts
Amps
Amps
Volts
0_C
1998-8