T4ARBU405M_10 Datasheet, PDF(1/4 Page) Rectron Semiconductor – TRANSIENT VOLTAGE SUPPRESSORS GPP BRIDGE RECTIFIER

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

T4ARBU405M_10 Datasheet, PDF (1/4 Pages) Rectron Semiconductor – TRANSIENT VOLTAGE SUPPRESSORS GPP BRIDGE RECTIFIER

T4ARBU405M

THRU

T4ARBU407M

TRANSIENT VOLTAGE SUPPRESSORS

GPP BRIDGE RECTIFIER

VOLTAGE RANGE 600 to 1000 Volts CURRENT 4.0 Amperes

FEATURES

* Ideal for printed circuit board

* Surge overload rating: 130 amperes peak

* Mounting position: Any

RBU

MECHANICAL DATA

* Epoxy: Device has UL flammability classification 94V-O

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 oC ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

.880 (22.3)

.860 (21.8)

.160 (4.1)

.140 (3.5)

.512 (13.0)

.100 (2.54)

.085 (2.16)

.140 (3.56)

.130 (3.30)

.085 (2.16)

.075 (1.90)

.210 (5.33)

.190 (4.83)

.080 (2.03)

.065 (1.65)

.022 (0.56)

.018 (0.46)

Dimensions in inches and (millimeters)

MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)

RATINGS

Maximum Recurrent Peak Reverse Voltage

Maximum RMS Voltage

Maximum DC Blocking Voltage

Maximum Average Forward Rectified Current

at TA = 50oC (With Heat-sink)

Peak Forward Surge Current 8.3 ms single half sine-wave

superimposed on rated load (JEDEC method)

Typical Current Squarad Time

SYMBOL

VRRM

VRMS

VDC

IFSM

I2t

T4ARBU405M

600

420

600

Peak Power Dissipation at TA=25OC,TP=1mS (Note 1)

Breakdown Voltage Range at IT=1mA

Maximum Peak Pulse Current

Maximum Clamping Voltage at IPPM =0.73A

Typical Junction Capacitance (Note 3)

Operating and Storage Temperature Range

PPPM

VBR

IPPM

TJ, TSTG

ELECTRICAL CHARACTERISTICS(@TA=25 OC unless otherwise noted)

CHARACTERISTICS

SYMBOL

T4ARBU405M

Maximum Instantaneous Forward Voltage at 4.0A DC

Maximum DC Reverse Current

at Rated DC Blocking Voltage

@TA = 25oC

@TA = 125oC

NOTES : 1. Non-repetitive current pulse, per Fig.8 and derated above TA=25OC per Fig.7.

2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".

3. Measured at 1MHz and applied reverse voltage of 4.0 voltage.

4. Available in Halogen-free epoxy by adding suffix -HF after the part nbr.

T4ARBU406M

800

560

800

4.0

130

Maximum 400

380~ 420

0.73

548

-55 to + 150

T4ARBU406M

1.1

5.0

500

T4ARBU407M

1000

700

1000

T4ARBU407M

UNITS

Volts

Amps

A2/Sec

Watts

Volts

Amps

Volts

UNITS

Volts

uAmps

2010-05

REV:O

▷