SS2 Datasheet, PDF (1/3 Pages) Jauch Quartz Gmbh – Quartz Crystal

RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 60 Volts CURRENT 1.0 Ampere
SS2
THRU
SS6
FEATURES
* Low power loss, high efficiency
* Low leakage
* Low forward voltage
* High current capability
* High speed switching
* High surge capabitity
* High reliability
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Mounting position: Any
* Weight: 0.016 gram
.035 (0.90)
.028 (0.70)
.114 (2.9)
.106 (2.7)
SOD-123F
.077 (1.95)
.069 (1.75)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
.008 (0.20)
.030 (0.75)
.022 (0.55)
.150 (3.8)
.142 (3.6)
.053 (1.35)
.047 (1.20)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (At TA = 25^oC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375” (9.5mm) lead length at TA-55⁰C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note1)
Operating Temperature Range
Storage Temperature Range
SYMBOL
SS2
VRRM
20
VRMS
14
VDC
20
IO
IFSM
CJ
TJ
TSTG
SS3
SS4
SS5
30
40
50
21
28
35
30
40
50
1.0
20
150
-55 to + 150
-55 to + 150
SS6
UNITS
60
Volts
42
Volts
60
Volts
Amps
Amps
pF
0_C
0_C
ELECTRICAL CHARACTERISTICS (At TA = 25^oC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 1.0A DC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
SYMBOL
SS2
SS3
SS4
SS5
SS6
UNITS
VF
.55
.70
Volts
IR
1.0
mAmps
10
mAmps
NOTES : _{1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.}
2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
2006-3
REV:A