SR820K Datasheet, PDF (1/3 Pages) Rectron Semiconductor – SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 200 Volts CURRENT 8.0 Ampere

SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 8.0 Ampere
SR820K
THRU
SR8200K
FEATURES
* High reliability
* Low switching loss
* Low forward voltage drop
* High current capability
* High switching capability
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Case: Molded plastic
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting: position: Any
* Weight: 0.33 grams
.264 (6.7)
.248 (6.3)
.217 (5.5)
.201 (5.1)
PIN3
D-PAK
.098 (2.5)
.083 (2.1)
.024 (0.6)
.016 (0.4)
PIN1
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYP .091
(2.30)
.183 (4.65)
.179 (4.55)
.031 (0.8)
.016 (0.4)
PIN 1
TYP .020
(0.50)
PIN 3
PIN 2
HEATSINK
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL SR820K SR830K SR835K SR840K SR845K SR850K SR860K SR880K SR8100K SR8150K SR8200K UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30 35 40 45 50
60
80 100
150
200 Volts
Maximum RMS Voltage
VRMS
14
21 25 28 32 35
42
56
70
105 140 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Case Temperature
VDC
20
30 35 40 45 50
60
80 100
150
200 Volts
IO
8.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
150
Amps
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range
Storage Temperature Range
Rq_JA
60
Rq_JC
3
CJ
700
TJ
450
150
TSTG
-55 to + 150
0_C/W
pF
0_C
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
Maximum Instantaneous Forward Voltage at 8.0A DC
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
SYMBOL SR820K SR830K SR835K SR840K SR845K SR850K SR860K SR880K SR8100K SR8150K SR8200K UNITS
V_F
.65
.75
.85
Volts
0.2
mA
IR
2
mA
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
4. Suffix "R" for Reverse Polarity.
5. Suffix "S" for D2-PAK Pkg.
2006-12