SR520K Datasheet, PDF (1/3 Pages) Rectron Semiconductor – SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 200 Volts CURRENT 5.0 Ampere

SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 5.0 Ampere
SR520K
THRU
SR5200K
FEATURES
* High reliability
* Low switching loss
* Low forward voltage drop
* High current capability
* High switching capability
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Case: Molded plastic
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting: position: Any
* Weight: 0.33 grams
.264 (6.7)
.248 (6.3)
.217 (5.5)
.201 (5.1)
PIN3
D-PAK
.098 (2.5)
.083 (2.1)
.024 (0.6)
.016 (0.4)
PIN1
PIN2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYP .091
(2.30)
.183 (4.65)
.179 (4.55)
.031 (0.8)
.016 (0.4)
PIN 1
TYP .020
(0.50)
PIN 3
PIN 2
HEATSINK
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 ^OC unless otherwise noted)
RATINGS
SYMBOL SR520K SR530K SR540K SR550K SR560K SR580K SR5100K SR5150K SR5200K UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
80
100
150
200 Volts
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
70
105
140 Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Case Temperature
VDC
20
30
40
50
60
80
100
150
200 Volts
IO
5.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
150
Amps
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range
Storage Temperature Range
Rq_JA
Rq_JC
CJ
TJ
TSTG
60
3
200
150
-55 to + 150
0_C/W
pF
0_C
0_C
ELECTRICAL CHARACTERISTICS(@TA=25 ^OC unless otherwise noted)
CHARACTERISTICS
SYMBOL SR520K SR530K SR540K SR550K SR560K SR580K SR5100K SR5150K SR5200K UNITS
Maximum Instantaneous Forward Voltage at 5.0A DC
V_F
.55
Maximum Average Reverse Current
at Rated DC Blocking Voltage
@TA = 25^oC
@TA = 100^oC
IR
.75
.85
0.2
2
Volts
mA
mA
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
3. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
4. Suffix "R" for Reverse Polarity.
5. Suffix "S" for D2-PAK Pkg.
2006-12